Schmidtchen, M. u. Kawalla, R.: Fast Numerical Simulation of Symmetric Flat Rolling Processes for Inhomogeneous Materials Using a Layer Model − Part I. Basic Theory.
Neh, K., Ullmann, M. u. Kawalla, R.: Substitution of Rare Earth Elements in Hot Rolled Magnesium Alloys with Improved Mechanical Properties.
Neh, K., Ullmann, M. u. Kawalla, R.: Microstructural Evolution of the Magnesium Alloy AZ31 with and without SiC Particles during Ultrasonic Melt Treatment. Key:
Nam, A., Prüfert, U., Eiermann, M. u. Kawalla, R.: Modelling the temperature evolution during hot reversing strip rolling of magnesium alloys. In:
Liu, Hai-Tao; Schneider, J.; Stöcker, Anett; Franke, A.; Gao, F.; Song, Hong-Yu et al. (2016): Microstructure and Texture Evolution in Non-oriented Electrical Steels Along Novel Strip Casting Route and Conventional Route. In:
Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnik, E., Bernhard, C., Bragin, S., Kawalla, R. u. Linzer, B.: Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model. IOP Conference Series:
Schneider, J., Franke, A., Stöcker, A., Liu, H.-T., Wang, G.-D. u. Kawalla, R.: Evolution and Interaction of the Microstructure and Texture at the Different Processing Steps for Ferritic Nonoriented Electrical Steels.
Shimanov, M., Korpała, G., Terzic, A. u. Kawalla, R.: Bainitic steels, their characteristics and applications. In:
Pranke, Katja; Guk, S. (2016): Material Flow in Mg-PSZ Particle Reinforced TRIP-Matrix-Composites due to Hot-Rolling. In:
Steentjes, S., Leuning, N., Dierdorf, J., Wei, X., Hirt, G., Weiss, H. A., Volk, W., Roggenbuck, S., Korte-Kerzel, S., Stöcker, A., Kawalla, R. u. Hameyer, K.: Effect of the Interdependence of Cold Rolling Strategies and Subsequent Punching on Magnetic Properties of NO Steel Sheets.
Stöcker, A., Franke, A., Hermann, H. u. Kawalla, R.: Influence of hot rolling condition on the final microstructure of nonoriented electrical steel Fe-3.2 wt.% Si. In:
Ullmann, Madlen; Saleh, Haitham; Neh, Kristina; Krbetschek, Christina; Henseler, Thorsten; Berge, Franz; Kawalla, Rudolf (2016): Umformtechnisch erzeugte hybride Werkstoffpaarungen auf Basis von AZ31-Gießwalzband. In: Alexander Brosius (Hg.): Den Eigenschaften Form geben. Tagungsband : 23. Sächsische Fachtagung Umformtechnik : Dresden, 7.-8. Dezember 2016. Dresden: TU Dresden, S. 194–203.
Rushchits, S., Aryshenskii, E., Kawalla, R. u. Serebryany, V.: Investigation of texture structure and mechanical properties evolution during hot deformation of 1565 aluminum alloy. In:
Wenzel, Claudia; Aneziris, Christos G.; Pranke, Katja (2016): Metal-Matrix Composites Prepared by Paper-Manufacturing Technology. In:
Yashin, V. V., Aryshensky, E. V., Kawalla, R., Serebryany, V. N. u. Rushchits, S. V.: Investigation impact of stressed state conditions and thermomechanical parameters on the texture and structure evolution in 1565ph aluminium alloy.
Leinenbach, C., Czaderski, C., Michels, J., Graf, M. u. Kawalla, R.: Development of rolling technology for an iron-based shape-memory-alloy. In:
Kittner, K., Wiesner, J. u. Kawalla, R.: A new approach for void closure in bulk metal forming. In:
Kawalla, R., Stöcker, A., Grigoleit, J., Wei, X., Dierdorf, J., Hirt, G., Roggenbuck, S., Korte-Kerzel, S., Weiss, H. A., Volk, W., Leuning, N., Steentjes, S. u. Hameyer, K.: Low-loss FeSi sheet for energy-efficient electrical drives.
Guk, S.; Milisova, Diana; Pranke, Katja (2016): Influence of Deformation Conditions on the Microstructure and Formability of Sintered Mg-PSZ Reinforced TRIP-Matrix-Composites. In:
Evgenii, A., Kawalla, R., Vladimir, A. u. Christian, S. (2016): Investigation of texture and structure evolution during hot rolling of 1070, 3104 and 8011 aluminum alloys in continuous finishing mill. TMP 2016 - 5th International Conference on
Baytekin-Gerngross, M.; Gerngross, M. D.; Carstensen, J.; Adelung, R. (2016): Making metal surfaces strong, resistant, and multifunctional by nanoscale-sculpturing. In:
Adamyanets, P., Schmidtchen, M. u. Kawalla, R.: Extension of the Freiberger model of spread for the calculation of material flow during rolling of long products to a new material group of mg alloys AZ31, AZ81, WE43. In:
Berge, F.; Henseler, T.; Krbetschek, C.; Ullmann, M.; Kawalla, R.: Influence of temperature and loading rate on the forming limit behaviour of twin-roll cast, rolled and heat-treated AZ31 as a function of the stress state,
Berge, F.; Winderlich, H.; Krbetschek, C.; Ullmann, M.; Kawalla, R.: The effect of sheet thickness, loading rate and punch diameter on the deformation behaviour of AZ31 during 3-point bending, Materials Science Forum 854 (2016), S. 65-72.
Berge, F.; Wollschläger, M.; Krbetschek, C.; Ullmann, M.: Influence of temperature, strain rate, and sheet thickness on the deformation behaviour of twin-roll cast, rolled and heat-treated AZ31 under uniaxial loading, .
Dembinska, J.; Graf, M.; Ullmann, M.; Neh, K.; Awiszus, B.; Kawalla, R.: Property oriented wire rolling technology for Mg-Al alloys, .
Krbetschek, C.; Berge, F.; Oswald, O.; Ullmann, M.; Kawalla, R.: Microstructure investigations of inverse segregations in twin-roll cast AZ31 strips, Magnesium Technology (2016), S. 369-374.
Schneider, J.; Franke, A.; Stöcker, A.; Kawalla, R.: Deformation structure and recrystallization of ferritic FeSi steels,