Publikationen mit Peer-Review:
Takht Firouzeh, S., Abendroth, M., Wetzig, T., Aneziris, C.G., Kiefer, B. (2024)
Employing miniaturized test methods to determine high-temperature strength of carbon-bonded alumina, Journal of the European Ceramic Society, Vol. 45, Iss. 3, March 2025, pp. 117035 (1-11),
Dai, Y., Voigt, C., Storti, E., Hubálková, J., Gehre, P., Liang, X., Yan, W., Li, L., Aneziris, C.G. (2024)
Open-cell ceramic foam filters for melt filtration: Processing, characterization, improvement and application, Journal of Materials Research and Technology, Vol. 32, September-October 2024, pp. 3402-3422,
Malik, A., Hütter, G., Abendroth, M., Kiefer, B. (2024)
Micromorphic FE² Simulation of Plastic Deformations of Foam Structures, International Journal of Mechanical Sciences, Vol. 282, 15 November 2024, pp. 109551 (1-19),
Wagner, R., Schmiedel, A., Döring, P., Storti, E., Dudczig, S., Henkel, S., Aneziris, C.G., Biermann, H., Weidner, A. (2024)
Relation of nonmetallic inclusions to the cyclic properties of steel 42CrMo4 after steel melt cleaning by filtration and related processes, Materials Science and Engineering: A, Vol. 892, February 2024, pp. 146070 (1-10),
Seleznev, M., Weidner, A., Biermann, H. (2024)
Detection of early fatigue damage during ultrasonic fatigue testing of steel by acoustic emission monitoring, International Journal of Fatigue, Vol. 185, August 2024, pp. 108367 (1-12),
Wetzig, T, Neumann, M., Weigelt, C., Dubberstein, T., Aneziris, C.G. (2024)
Alumina-Based Materials for the Extrusion of Filter Components for Steel Casting, Open Ceramics, Vol. 18, June 2024, pp. 100589 (1-9),
Abendroth, M., Malik, A., B. Kiefer, B. (2024)
A modified Ehlers model for inelastic behavior of foam structures, International Journal of Mechanical Sciences, Vol. 270, 2024, pp. 109094 (1-16),
Becker, H., Fankhänel, B., Charitos, S., Baier-Stegmaier, A., Leineweber, A., Pantleon, W. (2024)
Formation of primary intermetallic phases in the interaction of Fe-containing melts of recycled Al-Si alloys with Al2O3 and Al2O3-C filter materials: A µ-CT study, Journal of Materials Science and Technology, Vol. 184, June 2024, pp. 88-100,
Dai, Y., Hubálková, J., Voigt, C., Abendroth, M., Liang, X., Yan, W. Li, Y., Aneziris, C.G. (2023)
Tensile strength and damage of open-cell ceramic foams under cylindrical splitting test, Journal of Advanced Ceramics, 2023, Vol. 12, Iss. 11, pp. 2003-2016,
Ilatovskaia, M., Treichel, A., Fabrichnaya, O. (2023)
The MgO-TiO2-SiO2 system: experiments and thermodynamic assessment, Journal of the American Ceramic Society, Vol. 106, Iss. 12, December 2023, pp. 7704-7727, , of The American Ceramic Society 2024
Perminov, A., Günther, P.E., Ilatovskaia, M., Wei, X., Volkova, O. (2023)
Cold Crucible Induction Melting for the Fabrication of Fe-xTiC in-situ Metal Matrix Composites: Alloying Efficiency and Microstructural Analysis, Advanced Engineering Materials, Vol. 25, Iss. 21, November 2023, pp. 2300627 (1-12),
Lauermannová, A.-M., Jankovský, O., Lojka, M., Storti, E., Bock-Seefeld, B., Aneziris, C.G. (2023)
Lactose/tannin-based calcium aluminate coatings for carbon-bonded alumina foam filters: A novel approach in environment-friendly steel melt filtration, Ceramics International, Vol. 49, Iss. 22, November 2023, pp. 35574-35584,
Jankovsky, O., Lauermannova, A.-M., Lojka, M., Storti, E., Bock-Seefeld, B., Neumann, M., Aneziris, C.G. (2023)
Towards a new generation of environmentally-friendly ceramic foam filters: contribution of graphene nanoadditives in calcium aluminate-rich coatings, Journal of the European Ceramic Society, Vol. 43, Iss. 14, November 2023, pp. 6504-6515,
Storti, E., Kerber, F., Dudczig, S., Wagner, R., Weidner, A., Biermann, H., Aneziris, C.G. (2023)
Combined steel melt filtration through reactive and active filters, Open Ceramics, Vol. 15, September 2023, pp. 100415 (1-11),
Nicklas, J., Ditscherlein, L., Peuker, U. (2023)
Particle-bubble interactions: an investigation of the three-phase contact line by Atomic Force Microscopy, Langmuir, Vol. 39, Iss. 38, September 2023, pp. 13409-13758,
Voigt, C., Werzner, E., Fritzsch, R., Hubálková, J., Hassanabadi, M., Aune, R.E., Innocentini, M.D.M., Aneziris, C.G. (2023)
Influence of filter surface roughness on the pressure drop of ceramic foam filters, Open Ceramics, Vol. 15, September 2023, pp. 100379 (1-9),
Gehre, P., Takht Firouzeh, S., Schmidt, G., Dudczig, S. , Kiefer, B., Aneziris, C.G. (2023)
Flame-sprayed alumina molten metal filters for dead-mould casting application, Open Ceramics, Vol. 15, September 2023, pp. 100373 (1-8),
Nicklas, J, Peuker, U.A. (2023)
Agglomeration of fine hydrophobic particles: 1D and 2D characterization by dynamic image analysis of in-line probe data, Powder Technology, Vol. 426, August 2023, pp. 118685,
Heisig, L.-M., Wulf, R., Fieback, T. M. (2023)
Investigation and Optimization of the Hot Disk Method for Thermal Conductivity Measurements up to 750 °C, International Journal of Thermophysics, Vol. 44, Iss. 6, June 2023, pp. 82 (1-21),
Abendroth, M., Malik, A., Kiefer, B. (2023)
A modified Ehlers model for the description of inelastic behavior of porous structures, arxiv:2307.10216, July 2023, pp. 1-25,
Schoß, J.P., Baumann, B., Keßler, A., Szucki, M., Wolf, G. (2023)
Filtration efficiency in the recycling process of particle-reinforced aluminum alloys using different filter materials, International Journal of Metalcasting, Vol. 17, Iss. 3, July 2023, pp. 1681-1696,
Schoß, J.P., Schramm, E., Schönherr, P., Mrowka, N.-M., Schumann, H., Becker, H., Keßler, A., Szucki, M., Wolf, G. (2023)
Investigation of the formation of iron-rich intermetallic phases in Al-Si alloys via thermal analysis cooling curves, including a real-time detection for filtration process, Advanced Engineering Materials, Vol. 25, Iss. 9, May 2023, pp. 202201576 (1-20),
Kraus, J., Kortus, J. (2023)
Investigating the thermodynamics and kinetics of catechin pyrolysis for environmentally friendly binders, ACS Omega, Vol. 8, Iss. 4, April 2023 , pp. 12693-12701,
Wu, X., Weidner, A., Aneziris, C.G., Biermann, H. (2023)
High-temperature mechanical behavior of compact carbon-bonded alumina based on a pitch-free lactose-tannin binder system, Ceramics International, Vol. 49, Iss. 8, April 2023, pp. 13140-13149,
Seupel, A., Roth, S., Kiefer, B. (2023)
Phase-field modeling of chemically reactive multi-component/multi-phase systems, Proceedings in Applied Mathematics and Mechanics, Vol. 22, Iss. 1, March 2023, pp. E202200154 (1-6),
Bergin, A., Voigt, C., Fritzsch, R., Akhtar, S., Arnberg, L., Aneziris, C.G., Aune, R.E. (2023)
Investigation of mechanical and thermo-mechanical strength of ceramic foam filters (CFFs), Ceramics International, Vol. 49, Iss. 5, March 2023, pp. 8022-8031,
Ilatovskaia, M., Becker, H., Fabrichnaya, O., Leineweber, A. (2023)
The η-Al5Fe2 phase in the Al–Fe system: the issue with the sublattice model, Journal of Alloys and Compounds, Vol. 936, March 2023, pp. 168361,
Takht Firouzeh, S., Abendroth, M., Kiefer, B. (2022)
Application of Miniaturized Brazilian Disc Tests for the Determination of High-Temperature Strength of Ceramic Filter Materials, Procedia Structural Integrity, Vol. 42, 2022, pp. 1069-1073,
Koch, K., Henschel, S., Krüger, L. (2022)
Effect of the impact pulse on the dynamic fracture toughness behavior of high-strength steel and nodular cast iron, Procedia Structural Integrity, Vol. 42, 2022, pp. 506-512,
Henschel, S., Krüger, L. (2022)
One-Step Dynamic Calibration of Strain Measurement in a Split Hopkins Pressure Bar, Procedia Structural Integrity, Vol. 42, 2022, pp. 110-117,
Martin, S., Sulik, D., Fang, X.F., Becker, H., Leineweber, A. (2022)
Steel–Aluminum Hybrid Die Casting: Microstructures related to the applied Al–Si bond coating, Intermetallics, Vol. 151, December 2022, pp. 107712 (1-13),
Wei, X., Perminov, A., Ilatovskaia, M., Dudczig, S., Storti, E., Volkova, O. (2022)
Refractories for the processing of Fe-TiC alloy, Ceramics International, Vol. 48, Iss. 23, Part A, December 2022, pp. 34976-34986,
Wagner, R., Lehnert, R., Storti, E., Ditscherlein, L., Schröder, C., Dudczig, S., Peuker, U.A., Volkova, O., Aneziris, C.G., Biermann, H., Weidner, A. (2022)
Nanoindentation of alumina and multiphase inclusions in 42CrMo4 steel, Materials Characterization, Vol. 193, November 2022, pp. 112257 (1-12),
Roy, S., Prakash, A., Sandfeld, S. (2022)
Sintering of alumina nanoparticles: comparison of interatomic potentials, molecular dynamics simulations, and data analysis, Modelling and Simulation in Materials Science and Engineering, Vol. 30, No. 6, November 2022, pp. 065009 (1-26),
Voigt, C., Endler, D., Dietze, C., Hubálková, J., Moritz, K., Aneziris, C.G. (2022)
Influence of processing parameter on the surface quality of electrophoretically deposited alumina coatings on foam ceramics, Journal of the European Ceramic Society, Vol. 42, Iss. 13, October 2022, pp. 5874-5884,
Voigt, C., Schramm, A., Hubálková, J., Brachhold, N., Giesche, H., Aneziris, C.G. (2022)
Impact of carbon binders and carbon fillers on mercury intrusion and extrusion porosimetry of carbon-bonded alumina, Journal of the European Ceramic Society, Vol. 42, Iss. 13, October 2022, pp. 6264-6274,
Becker, H., Hielscher, R., Leineweber, A. (2022)
Interplay between habit plane and orientation relationship using the example of η'-Al8Fe3 in η-Al5Fe2: an electron backscatter analysis, Crystals, Vol. 12, Iss. 6, 2022, pp. 813 (1-24),
Wei, X., Kovtun, O., Yehorov, A., Aneziris, C.G., Volkova, O. (2022)
Selenium as a new decopperization for steel scrap, Journal of Materials Letters, Vol. 323, September 2022, pp. 132543 (1-3),
Wei, X., Storti, E., Dudczig, S., Yehorov, A., Fabrichnaya, O., Aneziris, C.G., Volkova, O. (2022)
The interaction of carbon-bonded ceramics with Armco iron, Journal of the European Ceramics Society, Vol. 42, Iss. 11, September 2022, pp. 4676-4685,
Brehm, S., Kraus, J., Himcinchi, C., Kortus, J. (2022)
A Raman spectroscopic study of the pyrolysis of lactose and tannins, Journal of Raman Spectroscopy, Vol. 53, Iss. 8, August 2022, pp. 1361-1370,
Becker, H., Bulut, N., Kortus, J., Leineweber, A. (2022)
β-4.5FeSi: Hierarchical crystal and defect structure: reconciling experimental and theoretical evidence including the influence of Al vs. Si ordering on the crystal structure, Journal of Alloys and Compounds, Vol. 911, August 2022, pp. 165015 (1-14),
Voigt, C., Schramm, A., Fankhänel, B., Schmid, E., Malczyk, P., Hubálková, J., Stelter, M., Charitos, A., Aneziris, C.G. (2022)
Preparation of ceramic foam filters with a lithium-containing surface, Metallurgical and Materials Transactions B, Vol. 53B, August 2022, pp. 2349-2363,
Kraus, J., Kortus, J. (2022)
A theoretical investigation into gallic acid pyrolysis, Journal of Computational Chemistry, Vol. 43, Iss. 15, June 2022, pp. 1023-1032,
Schramm, A., Nowak, R., Bruzda, G., Polkowski, W., Fabrichnaya, O., Aneziris, C.G. (2022)
High Temperature Wettability and Corrosion of ZrO2, Al2O3, Al2O3-C, MgO and MgAlON Ceramic Substrates by an AZ91 Magnesium Alloy Melt, Journal of the European Ceramic Society, Vol. 42, Iss. 6, June 2022, pp. 3023-3035,
Bergin, A., Voigt, C., Fritzsch, R., Akhtar, S., Arnberg, L., Aneziris, C.G., Aune, R.E. (2022)
Performance of Regular and Modified Ceramic Foam Filters (CFFs) during Aluminium Melt Filtration in a Pilot-Scale Setup, in: Eskin D. (eds) Light Metals 2022. The Minerals, Metals & Materials Series, Springer, Cham, pp. 640-648,
Voigt, C., Hubálková, J., Bergin, A., Fritzsch, R., Akhtar, S., Aune, R., Aneziris, C.G. (2022)
Short- and Long-Term Aluminum Filtration Trials with Carbon-Bonded Alumina Filters, in: Eskin D. (eds) Light Metals 2022. The Minerals, Metals & Materials Series, Springer, Cham, pp. 626-632,
Schramm, A., Thümmler, M., Fabrichnaya, O., Brehm, S., Kraus, J., Kortus, J., Rafaja, D., Scharf, C., Aneziris, C.G. (2022)
Reaction Sintering of MgAlON at 1500°C from Al2O3, MgO and AlN and its wettability by AlSi7Mg, Crystals, Vol. 12, Iss. 5, May 2022, pp. 654 (1-26),
Wei, X., Dudczig, S., Storti, E., Ilatovskaia, M., Endo, R., Aneziris, C.G., Volkova, O. (2022)
Interaction of molten Armco iron with various ceramic substrates at 1600 °C, Journal of the Europen Ceramic Society, 2022, Vol. 42, Iss. 5, May 2022, pp. 2535-2544,
Neumann, M., Hubálková, J., Voigt, C., Grabenhorst, J., Aneziris, C.G. (2022)
On the fracture statistics of open-porous alumina foam structures, Journal of the European Ceramic Society, Vol. 42, Iss. 5, May 2022, pp. 2331-2340,
Takht Firouzeh, S., Abendroth, M., Fischer, U., Aneziris, C.G., Kiefer, B. (2022)
Utilization of a Small Miniaturized Brazilian Disc Test for Strength Measurements of C-bonded Alumina Filter Materials, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2101081 (1-10),
Malik, A., Abendroth, M., Hütter, G., Kiefer, B. (2022)
A hybrid approach employing neural networks to simulate the elastic-plastic deformation behavior of 3D-foam structures, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100641 (1-12),
Ditscherlein, L., Zienert, T., Dudczig, S., Aneziris, C.G., Peuker, U.A. (2022)
AFM investigation of the in situ-formed oxide layer at the interface of Al2O3-C/steel melt in terms of adhesion force and roughness in a model system, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100634 (1-12),
Lange, N., Abendroth, M., Werzner, E., Hütter, G., Kiefer, B. (2022)
Influence of the foam morphology on the mechanical behavior of flow through foam filters during the filtration processes, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100784 (1-16),
Lehmann, H., Werzner, E., Malik, A., Abendroth, M., Ray, S., Jung, B. (2022)
Computer-Aided Design of Metal Melt Filters: Geometric Modifications of Open-Cell Foams, Effective Hydraulic Properties and Filtration Performance, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100878 (1-11),
Demuth, C., Werzner, E., Dudczig, S., Aneziris, C.G., Ray, S. (2022)
Large Eddy Simulation of Turbulent Flow and Inclusion Transport during Filtration of Liquid Steel inside Open-cell Ceramic Foams, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100717 (1-8),
Asad, A., Lehmann, H., Jung, B., Schwarze, R. (2022)
Numerical Assessment of the Immersion Process of a Ceramic Foam Filter in a Steel Melt, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100753 (1-8) ,
Schoß, J.P., Becker, H., Keßler, A., Leineweber, A., Wolf, G. (2022)
Removal of iron from a secondary Al-Si die-casting alloy by metal melt filtration in a laboratory filtration apparatus, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100695 (1-15),
Heisig, L.-M., Markuske, K., Werzner, E., Wulf, R., Fieback, T.M. (2022)
Experimental und simplified predictive determination of extinction coefficients of ceramic open-cell foams used for metal melt filtration, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100723 (1-13),
Salomon, A., Motylenko, M., Rafaja, D. (2022)
Formation of interface layers between corundum-based refractory ceramics with carbon additions and molten 42CrMo4 steel, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100690 (1-11),
Fankhänel, B., Hubálková, J., Aneziris, C.G., Stelter, M., Charitos, A. (2022)
Influencing the hydrogen porosity in aluminum casting by (re)active filter materials, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100579 (1-10),
Wetzig, T., Neumann, M., Schwarz, M., Schöttler, L., Abendroth, M., Aneziris C.G. (2022)
Rapid prototyping of carbon-bonded alumina filters with flame-sprayed alumina coating for bottom-teeming steel ingot casting, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100777 (1-10),
Bock-Seefeld, B., Wetzig, T., Hubálková, J., Schmidt, G., Abendroth, M., Aneziris, C.G. (2022)
Fabrication of carbon-bonded alumina filters by additive manufactured, water-soluble polyvinyl alcohol filter templates and alginate-based slips, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100655 (1-10),
Wu, X., Wetzig, T., Aneziris, C.G., Weidner, A., Biermann, H. (2022)
Compression behavior of carbon-bonded alumina spaghetti filters at room and high temperatures, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100613 (1-7),
Brehm, S., Himcinschi, C., Kraus, J., Bock-Seefeld, B., Aneziris, C.G., Kortus, J. (2022)
Raman spectroscopic characterization of environmentally friendly binder systems for carbon-bonded filters, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100544 (1-10),
Kraus, J., Schwalbe, S., Trepte, K., Kortus, J. (2022)
Testing self-interaction for molecules in solution, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100572 (1-12),
Wei, X., Yehorovy, A., Storti, E., Dudczig, S., Fabrichnaya, O., Aneziris, C.G., Volkova, O. (2022)
Phenomenon of whiskers formation in Al2O3-C-refractories, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100718 (1-11),
Becker, H., Fankhänel, B., Voigt, C., Charitos, A., Stelter, M., Aneziris, C.G., Leineweber, A. (2022)
Interaction of Fe-containing, secondary Al-Si alloy with oxide and carbon-containing ceramics for Fe removal, Advanced Engineering Materials, Vol. 14, Iss. 2, February 2022, pp. 2100595 (1-12),
Wu, X., Ranglack-Klemm, Y., Storti, E., Dudczig, S., Aneziris, C.G., Weidner, A., Biermann, H. (2022)
Residual properties of carbon-bonded alumina foam filter coated with carbon-containing calcium aluminate after contact with steel melt, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100642 (1-7),
Wagner, R., Schmiedel, A., Dudczig, S., Aneziris, C.G., Volkova, O., Biermann, H., Weidner, A. (2022)
Tailoring nonmetallic inclusions in 42CrMo4 as a preparative tool for active and reactive steel melt filtration, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100640 (1-9),
Schramm, A., Recksiek, V., Dudczig, S., Scharf, C., Aneziris, C.G. (2022)
Immersion testing of variously coated ceramic foam filters in an AZ91 magnesium melt, Advanced Engineering Materials, Vol. 24, Iss. 2, February 2022, pp. 2100519 (1-12),
Ilatovskaia, M., Fabrichnaya, O. (2022)
Liquid immiscibility and thermodynamic assessment of the Al2O3-TiO2-SiO2 system, Journal of Phase Equlilibria and Diffusion, Vol. 43, January 2022, pp. 15-31,
Wu, X., Weidner, A., Aneziris, C.G., Biermann, H. (2022)
Manufacture of carbon-bonded alumina based on a lactose-tannin binder system via slip casting, Ceramics International, Vol. 48, Iss. 1, January 2022, pp. 148-156,
Wei, X., Dudczig, S., Chebykin, D., Aneziris, C.G., Volkova, O. (2021)
Verification of possibility of molten steels decopperization with ZnAl2O4, Metals, Vol. 11, No. 12, December 2021, pp. 2030 (1-11),
Ilatovskaia, M., Fabrichnaya, O. (2021)
Critical assessment and thermodynamic modeling of the Al-Mn-O system, Journal of Alloys and Compounds, Vol. 884, December 2021, pp. 161153 (1-20),
Schmiedel, A., Kirste, T., Morgenstern, R., Weidner, A., Biermann, H. (2021)
The fatigue life of 42CrMo4 steel in the range of HCF to VHCF at elevated temperatures up to 773 K, International Journal of Fatigue, Vol. 152, November 2021, 106437,
Asad, A., Schwarze, R. (2021)
Numerical Investigation of the Combined Effect of Reactive Cleaning and Active Filtration on Inclusion Removal in an Induction Crucible Furnace, Steel Research International, Vol. 92, Iss. 11, November 2021, pp. 2100122 (1-11),
Baumann, B., Keßler, A., Hoppach, E., Wolf, G., Szucki, M., Hilger, O. (2021)
Investigation of particle filtration in aluminum alloy, Archives of Foundry Engineering, Vol. 21, Iss. 3, September 2021, pp. 70-80,
Koch, K., Kietov, V., Henschel, S., Krüger, L. (2021)
Effect of ceramic particles on the dynamic strength, deformation and toughness behavior of 42CrMo4, EPJ Web of Conferences, Vol. 250, September 2021, DYMAT 2021, pp. 03001 (1-6),
Gehre, P., Preisker, T., Dudczig, S., Schmidt, G., Wöhrmeyer, C., Parr, C., Aneziris, C.G. (2021)
Impact of MgO-C with CMA- and Nanaocarbon Addition on Steel Cleanliness, Interceram - International Ceramic Review, Vol. 70, Iss. 3, September 2021, pp. 26-31,
Dubiel, S.M., Gondek, L., Zienert, T., Żukrowski, J. (2021)
Mössbauer spectroscopic and XRD studies of two η-Fe2Al5 intermetallics, Intermetallics, Vol. 135, August 2021, pp. 107217 (1-9),
Lange, N., Hütter, G., Kiefer, B. (2021)
An efficient monolithic solution scheme for FE2 problems, Computer Methods in Applied Mechanics and Engineering, Vol. 382, August 2021, pp. 113886 (1-15),
Bergin, A., Voigt, C., Fritzsch, R., Akhtar, S., Arnberg, L.E., Aneziris, C.G., Aune, R.E. (2021)
Experimental Study on the Chemical Stability of Phosphate-Bonded Al2O3-based Ceramic Foam Filters (CFFs), Metallurgical and Materials Transactions B, Vol. 52B, August 2021, pp. 2008-2025,
Neumann, M., Gehre, P., Nwokoye, R.I., Jelitto, H., Schneider, G.A., Aneziris, C.G. (2021)
Life time prediction of self-supporting flame-sprayed alumina-rich coatings, Ceramics International, Vol. 47, Iss. 13, July 2021, pp. 18656-18661,
Weber, C., Knüpfer, P., Buchmann, M., Rudolph, M., Peuker, U.A. (2021)
A comparison between approaches for the calculation of van der Waals interactions in flotation systems, Minerals Engineering, Vol. 167, June 2021, pp. 106804 (1-9),
Wagner, R., Seleznev, M., Fischer, H., Ditscherlein, R., Becker, H., Dietrich, B.G., Keßler, A., Leißner, T., Wolf, G., Leinweber, A., Peuker, U.A., Biermann, H., Weidner, A. (2021)
Impact of melt conditioning and filtration on iron-rich β phase in AlSi9Cu3 and its fatigue life studied by µCT, Materials Characterization, Vol. 174, April 2021, pp. 111039 (1-12),
Voigt, C., Hubálková, J., Bergin, A., Fritzsch, R., Aune, R., Aneziris, C.G. (2021)
Overview of the possibilities and limitations of the characterization of ceramic foam filters for metal melt filtration, in: Perander L. (eds) Light Metals 2021. The Minerals, Metals & Materials Series, Springer, Cham, pp. 785-793,
Böhme, S.A., Vinogradov, A., Biermann, H., Weidner, A., Schmiedel, A., Henkel, S. (2021)
Fatigue of carburised CrNiMo steel: Testing and modelling concept, Fatigue & Fracture of Engineering Materials & Structures, Vol. 44, Iss. 3, March 2021, pp. 788-804,
Wu, X., Ranglack-Klemm, Y., Hubálková, J., Solarek, J., Aneziris, C.G., Weidner, A., Biermann, H. (2021)
Impact of high temperature on the compression behavior of carbon-bonded alumina filters with functionalized coatings, Ceramics International, Vol. 47, Iss. 3, February 2021, pp. 3920-3927,
Seleznev, M., Weidner, A., Biermann, H., Vinogradov, A. (2021)
Novel method for in situ damage monitoring during ultrasonic fatigue testing by the advanced acoustic emission technique, International Journal of Fatigue, Vol. 142, January 2021, pp. 105918 (1-6),
Ilatovskaia, M., Bärthel, F., Fabrichnaya, O. (2020)
Phase relations in the Al2O3-TiO2-SiO2 system, Ceramics International, Vol. 46, Iss. 18, Part B, December 2020, pp. 29402-29412,
Henschel, S., Posselt, F., Dudczig, S., Wetzig, T., Aneziris, C. G., Krüger, L. (2020)
Experimental determination of toughness under mode I/II loading, Procedia Structural Integrity, Vol. 28, December 2020, pp. 1369-1377,
Kirste, T., Morgenstern, R., Schmiedel, A., Weidner, A., Biermann, H. (2020)
Influence of the local degree of deformation on the temperature dependent fatigue behavior of a ferritic‐pearlitic steel, Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, Iss. 12, December 2020, pp. 2786-2799,
Neumann, M., Gehre, P., Hubálková, J., Zielke, H., Abendroth, M., Aneziris, C.G. (2020)
Statistical Analysis of the flexural strength of free-standing flame-sprayed alumina coatings prior and after thermal shock, Journal of Thermal Spray Technology, Vol. 29, November 2020, pp. 2026-2032,
Schmiedel, A., Henkel, S., Kirste, T., Morgenstern, R., Weidner, A., Biermann, H. (2020)
Ultrasonic fatigue testing of cast steel G42CrMo4 at elevated temperatures, Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, Iss. 10, October 2020, pp. 2455-2475,
Voigt, C., Fankhänel, B., Dietrich, B., Storti, E., Badowski, M., Gorshunova, M., Wolf, G., Stelter, M., Aneziris, C.G. (2020)
Influence of Ceramic Foam Filters with Al2O3 Nanocoating on the Aluminum Filtration Behavior tested with and without Grain Refiner, Metallurgical and Materials Transactions B, Vol. 51B, October 2020, pp. 2371-2380,
Voigt, C., Hubálková, J., Zienert, T., Fankhänel, B., Stelter, M., Charitos, A., Aneziris, C. G. (2020)
Aluminum melt filtration with carbon bonded alumina filters, Materials, Vol. 13, Iss. 18, September 2020, pp. 3962 (1-13),
Schwalbe, S., Fiedler, L., Kraus, J., Kortus, J., Trept, K., Lehtola, S. (2020)
PyFLOSIC - Python based Fermi-Löwdin orbital self-interaction correction, The Journal of Chemical Physics, Vol. 153, Iss. 8, August 2020, pp. 084104 (1-15),
Seleznev, M., Weidner, A., Biermann, H. (2020)
On the formation of ridges and burnished debris along internal fatigue crack propagation in 42CrMo4 steel, Fatigue and Fracture of Engineering Materials and Structures, Vol. 43, Iss. 7, July 2020, pp. 1567-1582,
Neumann, M., Wetzig, T., Fruhstorfer, J., Lamert, V., Jelitto, H., Schneider, G.A., Aneziris, C.G. (2020)
Crack propagation behavior of carbon free and carbon bonded alumina based filter materials, Ceramics International, Vol. 46, Iss. 8, Part A, June 2020, pp. 11198-11207,
Voigt, C., Hubálková, J., Giesche, H., Aneziris, C.G. (2020)
Intrusion and extrusion mercury porosimetry measurements at Al2O3-C - influence of measuring parameter, Microporous and Mesoporous Materials, Vol. 299, June 2020, pp. 110125 (1-6),
Jankovsky, O., Lojka, M., Jirickova, A., Aneziris, C.G., Storti, E., Sedmidubsky, D. (2020)
Carbon-bonded alumina filters coated by graphene oxide for water treatment, Materials, Vol. 13, Iss. 8, April 2020, pp. 2006 (1-10),
Zielke, H., Wetzig, T., Himcinschi, C., Abendroth, M., Kuna, M., Aneziris, C.G. (2020)
Influence of carbon content and coking temperature on the biaxial flexural strength of carbon-bonded alumina at elevated temperatures, Carbon, Vol. 159, April 2020, pp. 324-332,
Abendroth, M., Hütter, G., Settgast, C., Malik , A., Kiefer, B., Kuna, M. (2020)
A Hybrid Approach to Describe the Elastic-Plastic Deformation Behavior of 2D Cellular Solids Including Damage Effects, Technische Mechanik, Vol. 40, Iss. 1, March 2020, pp. 5-14,
Settgast, C., Hütter, G., Kuna, M., Abendroth, M. (2020)
A hybrid approach to simulate the homogenized irreversible elastic-plastic deformations and damage of foams by neural networks, International Journal of Plasticity, Vol. 126, March 2020, pp. 102624 (1-16),
Zienert, T., Dudczig, S., Malczyk, P., Brachhold, N., Aneziris, C.G. (2020)
Characterisation of the in situ-formed oxide layer at the steel melt/carbon-bonded alumina interface, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900811 (1-11),
Hoppach, D., Werzner, E., Demuth, C., Löwer, E., Lehmann, H., Ditscherlein, L., Ditscherlein, R., Peuker, U.A., Ray, S. (2020)
Experimental Investigations of the Depth Filtration Inside Open-cell Foam Filters Supported by High-Resolution CT Scanning and Pore-Scale Numerical Simulations, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900761 (1-13),
Schmidt, A., Fruhstorfer, J., Dudczig, S., Schmidt, G., Hubálková, J., Voigt, C., Aneziris, C.G. (2020)
Interactions between carbon-bonded alumina filters and molten steel: Impact of a titania-doped filter coating, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900647 (1-10),
Neumann, S., Asad, A., Schwarze, R. (2020)
Numerical Investigation of the Filtration Influenced by Micro-Scale CO-Bubbles in Steel Melt, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900658 (1-11),
Asad, A., Schwarze, R., Aneziris, C.G. (2020)
Numerical Investigation of the Filtration Influenced by Micro-Scale CO-Bubbles in Steel Melt, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900591 (1-7),
Schramm, A., Voigt, C., Hubálková, J., Aneziris, C.G., Scharf, C. (2020)
Influence of the manufacturing technique on the macro- and microstructure of reticulated carbon-bonded alumina foams, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900525 (1-11),
Wetzig, T., Schmidt, A., Dudczig, S., Schmidt, G., Brachhold, N., Aneziris, C.G. (2020)
Carbon-bonded alumina spaghetti filters by alginate-based robo gel casting, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900657 (1-11),
Ranglack-Klemm, Y., Storti, E., Biermann, H., Aneziris, C.G. (2020)
Influence of carbon nanotubes-based coatings on the high temperature compression strength of Al2O3-C foam filter structures, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900423 (1-7),
Storti, E., Jankovsky, O., Sedmidubsky, D., Dudczig, S., Aneziris, C.G. (2020)
Filter coatings based on combination of nanomaterials for steel melt filtration, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900457 (1-8),
Seleznev, M., Henschel, S., Storti, E., Aneziris, C.G., Krüger, L., Weidner, A., Biermann, H. (2020)
Effect of filter functional coating on detrimental non-metallic inclusions in 42CrMo4 steel and its resulting mechanical properties, Advanced Engineering Materials, Vol. 22, Iss. 2, February 2020, pp. 1900540 (1-11),
Ditscherlein, L., Knüpfer, P., Peuker, U.A. (2019)
The influence of nanobubbles on the interaction forces between alumina particles and ceramic foam filters, Powder Technology, 2019, Vol. 357, December 2019, pp. 408-416,
Storti, E., Himcinschi, C., Kortus, J., Aneziris, C.G. (2019)
Synthesis and characterization of calcium zirconate nanofibers produced by electrospinning, Journal of the European Ceramic Society, Vol. 39, Iss. 16, December 2019, pp. 5338-5344,
Neumann, S., Asad, A., Kasper, T., Schwarze, R. (2019)
Numerical simulation of metal melt flow in a one-strand tundish regarding active filtration and reactive cleaning, Metallurgical and Materials Transactions B, Vol. 50, Iss. 5, October 2019, pp. 2334-2342,
Storm, J., Abendroth, M., Kuna, M. (2019)
Effect of morphology, topology and anisoptropy of open cell foams on their yield surface, Mechanics of Materials, Vol. 137, October 2019, pp. 103145 (1-18),
Seleznev, M., Merson, E., Weidner, A., Biermann, H. (2019)
Evaluation of very high cycle fatigue zones in 42CrMo4 steel with plate-like alumina inclusions, International Journal of Fatigue, Vol. 126, September 2019, pp. 258-269,
Fruhstorfer, J., Hubálková, J., Aneziris, C.G. (2019)
Particle packings minimizing density gradients of coarse-grained compacts, Journal of the European Ceramic Society, Vol. 39, Iss. 10, August 2019, pp. 3264-3276,
Voigt, C., Ditscherlein, L., Werzner, E., Zienert, T., Nowak, R., Peuker, U., Sobczak, N., Aneziris, C.G. (2019)
Influence of the wetting behavior on the aluminum melt filtration, in: Chesonis C. (eds) Light Metals 2019. The Minerals, Metals & Materials Series, Springer, Cham, pp. 1071-1079,
Voigt, C., Dietrich, B., Badowski, M., Gorshunova, M., Wolf, G., Aneziris, C.G. (2019)
Impact of the filter roughness on the filtration efficiency for aluminum melt filtration, in: Chesonis C. (eds) Light Metals 2019. The Minerals, Metals & Materials Series, Springer, Cham, pp. 1063-1069,
Luchini, B., Storti, E., Wetzig, T., Settgast, C., Abendroth, M., Hubálková, J., Pandolfelli, V.C., Aneziris, C.G. (2019)
Mechanical and physical characterization of Al2O3-C foam filters produced by distinct processing routes: the importance of the ceramic strut morphology, Journal of the European Ceramic Society, Vol. 39, Iss. 8, July 2019, pp. 2760-2769,
Fruhstorfer, J., Hubálková, J., Leißner, T., Peuker, U., Aneziris, C.G. (2019)
Corrosion of carbon free and bonded refractories for application in steel ingot casting: An approach for improving steel quality, Materials Science Forum, Vol. 959, June 2019, pp. 166-176,
Moritz, K., Dietze, C., Voigt, C., Hubálková, J., Aneziris, C.G. (2019)
Porous alumina coatings on carbon-bonded foam filters by electrophoretic deposition, Ceramic International, Vol. 45, Iss. 8, June 2019, pp. 10701-10706,
Ilatovskaia, M., Fabrichnaya, O. (2019)
Thermodynamic assessment of the Al2O3-MgO-TiO2 system, Journal of Alloys and Compounds, Vol. 790, June 2019, pp. 1137-1148,
Zienert, T., Fabrichnaya, O. (2019)
Prediction of heat capacity for crystalline substances, Journal of CALPHAD, Vol. 65, June 2019, pp. 177-193,
Jorge, P., Mendes, M.A.A., Werzner, E., Pereira, J.M.C. (2019)
Characterization of laminar flow in periodic open-cell porous foams, Chemical Engineering Science, Vol. 201, June 2019, pp. 397-412,
Neumann, M., Gehre, P., Kuebler, J., Dadivanyan, N., Jelitto, H., Schneider, G.A., Aneziris, C.G. (2019)
Stable crack propagation in free standing thermal sprayed Al2O3 and Al2O3-ZrO2-TiO2 coatings, Ceramics International, Vol. 45, Iss. 7, Part A, May 2019, pp. 8761-8766,
Grabenhorst, J., Luchini, B., Fruhstorfer, J., Voigt, C., Hubálková, J., Chen, J., Li, N., Li, Y., Aneziris, C.G. (2019)
Influence of the measurement method and sample dimensions on the Young's modulus of open porous alumina foam structures, Ceramics International, Vol. 45, Iss. 5, April 2019, pp. 5987-5995,
Becker, H., Bergh, T., Vullum, P.E., Leineweber, A., Li, Y. (2019)
β- and δ-Al-Fe-Si intermetallic phase, their intergrowth and polytype formation, Journal of Alloys and Compounds, Vol. 780, April 2019, pp. 917-929,
Kietov, V., Henschel, S., Krüger, L. (2019)
AE analysis of damage processes in cast iron and high-strength steel at different temperatures and loading rates, Engineering Fracture Mechanics, Vol. 210, April 2019, pp. 320-341,
Settgast, C., Abendroth, M., Kuna, M. (2019)
Constitutive modelling of plastic deformation behavior of open-cell foam structures using neural networks, Mechanics of Materials, Vol. 131, April 2019, pp. 1-10,
Becker, H., Bergh, T., Vullum, P.E., Leineweber, A., Li, Y. (2019)
Effect of Mn and cooling rates on α, β and δ Al-Fe-Si formation in a secondary Al-Si alloy, Materialia, Vol. 5, March 2019, pp. 100198 (1-13),
Bock, B., Schmidt, A., Sniezek, E., Dudczig, S., Schmidt, G., Szczerba, J., Aneziris, C.G. (2019)
Impact of Spinel forming Systems (Fe-/Mg-/Mn-Al-O) as Functional Coating Materials for Carbon-Bonded Alumina Filters on Steel Melt Filtration, Ceramics International, Vol. 45, Iss. 4, March 2019, pp. 4499-4508,
Gleinig, J., Weidner, A., Fruhstorfer, J., Aneziris, C.G., Volkova, O., Biermann, H. (2019)
Characterization of nonmetallic inclusions in 18CrNiMo7-6, Metallurgical and Materials Transaction B, Vol. 50, Iss. 1, February 2019, pp. 337–356,
Settgast, C., Ranglack-Klemm, Y., Hubalkova, J., Abendroth, M., Kuna, M., Biermann, H., Aneziris, C.G. (2019)
Validation of an experimental-numerical approach for the high temperature behaviour of open-cell ceramic foams, Journal of the European Ceramic Society, Vol. 39, Iss. 2-3, February-March 2019, pp. 610-6178,
Salvini, V.R., Luchini, B., Aneziris, C.G., Pandolfelli, V.C. (2019)
Innovation in ceramic foam filters manufacturing process, International Journal of Applied Ceramic Technology, Vol. 16, Iss. 1, January/February 2019, pp. 378-388,
Zienert, T. (2019)
cp-tools: A python library for predicting heat capacity of crystalline substances, SoftwareX, Vol. 9, January-June 2019, pp. 244-247,
Himcinschi, C., Rix, J., Röder, C., Rudolph, M., Yang, M., Rafaja, D., Kortus, J., Alexe, M. (2019)
Ferroelastic domain identification in BiFeO3 crystals using Raman spectroscopy, International Journal of Scientific Reports, Vol. 9, January 2019, pp.379 (1-9),
Rudolph, M., Motylenko, M., Rafaja, D. (2019)
Structure model of γ-Al2O3 based on planar defects, Journal of Applied Crystallography IUCrJ, Vol. 6, Part 1, January 2019, pp. 116-127,
Herdering, A., Abendroth, M., Gehre, P., Hubálková, J., Aneziris, C.G. (2019)
Additive manufactured polyamide foams with periodic grid as templates for the production of functional coated carbon-bonded alumina foam filters, Ceramics International, Vol. 45, Iss. 1, January 2019, pp. 153-159,
Seleznev, M., Gleinig, J., Wong, K.Y., Weidner, A., Biermann, H. (2018)
Very high cycle fatigue behaviour of 42CrMo4 steel with plate-like alumina inclusions, Procedia Structural Integrity, Vol. 13, December 2018, pp. 2071-2076,
Patel, V.M., Mendes, M.A., Talukdar, P., Ray, S. (2018)
Development of correlations for effective thermal conductivity of a tetrakaidecahedra structure in presence of combined conduction and radiation heat transfer, International Journal of Heat and Mass Transfer, Vol. 127, Part A, December 2018, pp. 843-856,
Becker, H., Thum, A., Distl, B., Leineweber, A. (2018)
Effect of melt conditioning on removal of Fe from secondary Al-Si alloys containing Mg, Mn and Cr, Metallurgical and Materials Transaction A, Vol. 49, Iss. 12, December 2018, pp. 6375-6389,
Wetzig, T., Baaske, A., Karrasch, S., Brachhold, N., Rudolph, M., Aneziris, C.G. (2018)
Application of exchangeable carbon-bonded alumina foam filters in an industrial tundish for the continuous casting of steel, Ceramics International, Vol. 44, Iss. 18, December 2018, pp. 23024–23034,
Haustein, M., Asad, A., Schwarze, R. (2018)
Collision of micro-sized non-metallic inclusions in liquid steel flows - a computational study, JOM, Vol. 70, Iss. 12, December 2018, pp. 2943-2949,
Asad, A., Haustein, M., Chattopadhyay, K., Aneziris, C.G., Schwarze, R. (2018)
Numerical Assessment of a Filtration Experiment Influenced by Arising Micro-Scale Carbon Monoxide Bubbles in Steel Melt, JOM, Vol. 70, Iss. 12, December 2018, pp. 2927-2933,
Voigt, C., Hubálková, J., Ditscherlein, L., Ditscherlein, R., Peuker, U., Giesche, H., Aneziris, C.G. (2018)
Characterization of reticulated ceramic foams with mercury intrusion porosimetry and mercury probe atomic force microscopy, Ceramics International, Vol. 44, Iss. 18, December 2018, pp. 22963-22975,
Himcinschi, C., Biermann, C., Storti, E., Dietrich, B., Wolf, G., Kortus, J., Aneziris, C.G. (2018)
Innovative carbon-bonded filters based on a new environmental-friendly binder system for steel melt filtration, Journal of the European Ceramic Society, Vol. 38, Iss. 16, December 2018, pp. 5580-5589,
Jankovský, O., Storti, E., Schmidt, G., Dudczig, S., Sofer, Z., Aneziris, C.G. (2018)
Unique wettability phenomenon of carbon-bonded alumina with advanced nanocoating, Applied Materials Today, Vol. 13, December 2018, pp. 24-31,
Ditscherlein, L., Gulden, S.J., Müller, S., Baumann, R.-P., Peuker, U.A. (2018)
Measuring interactions between yeast cells and a micro-sized air bubble via atomic force microscopy, Journal of Colloid and Interface Science, Vol. 532, December 2018, pp. 689-699,
Salomon, A., Amirkhanyan, L., Ullrich, C., Motylenko, M., Fabrichnaya, O., Kortus, J., Rafaja, D. (2018)
Interface reactions between rutile coatings and molten aluminium or AlSi7Mg0.6 alloy, Journal of the European Ceramic Society, Vol. 38, Iss. 16, December 2018, pp. 5590-5600,
Seleznev, M., Wong, K.-Y., Stoyan, D., Weidner, A., Biermann, H. (2018)
Cluster detection of non-metallic inclusions in 42CrMo4 steel, Steel Research International, Vol. 89, Iss. 11, November 2018, pp. 1800216 (1-9),
Schwalbe, S., Hahn, T., Liebing, S., Trepte, K., Kortus, J. (2018)
Fermi-Löwdin orbital self-interaction corrected density functional theory: Ionization potentials and enthalpies of formation, Journal of Computational Chemistry, Vol. 39, Iss. 29, November 2018, pp.2463-2471,
Jankovský, O., Storti, E., Moritz, K., Luchini, B., Jiříčková, A., Aneziris, C.G. (2018)
Nano-functionalization of carbon-bonded alumina using graphene oxide and MWCNTs, Journal of the European Ceramic Society, Vol. 13, Iss. 14, November 2018, pp. 4732-4738,
Ilatovskaia, M., Saenko, I., Savinykh, G., Fabrichnaya, O. (2018)
Experimental study of phase equilibria in the Al2O3-MgO-TiO2 system and thermodynamic assessment of the MgO-TiO2 system, Journal of the American Ceramic Society, Vol. 101, Iss. 11, November 2018, pp. 5198-5218,
Lehmann, H., Werzner, E., Demuth, C., Reh, S., Jung, B. (2018)
Efficient Visualization of Large-Scale Metal Melt Flow Simulations using Lossy In-Situ Tabular Encoding for Query-Driven Analytics, in: Proceedings of the IEEE International Conference on Computational Science and Engineering (CSE-2018), 29.-31.10.2018, Bucharest, Romania, pp. 123-131, DOI 10.1109/CSE.2018.00024,
Asad, A., Chattopadhyay, K., Schwarze, R. (2018)
Effect of turbulence modeling o the melt flow and inclusions transport in a steel filtration experiment, Metallurgical and Materials Transactions B, Vol. 18, Iss. 5, October 2018, pp. 2270-2277,
Wetzig, T., Luchini, B., Dudczig, S., Hubálková, J., Aneziris, C.G. (2018)
Development and testing of exchangeable carbon-bonded alumina foam filter systems for continuous casting of steel, Ceramics International, Vol. 44, Iss.15, October 2018, pp. 18143-18155,
Schramm, A., Bock, B., Zienert, T., Ditze, A., Schmidt, A., Scharf, C., Aneziris, C.G. (2018)
Interface reactions of differently coated carbon-bonded alumina filters with an AZ91 magnesium alloy melt, Ceramics International, Vol. 44, Iss. 14, October 2018, pp 17415–17424,
Henschel, S., Krüger, L. (2018)
Temperature dependent crack initiation of 42CrMo4 steel at high loading rates, EPJ Web of Conferences, Vol. 183, September 2018, DYMAT 2018, pp. 02001 (1-6),
Luz, A.P., Consoni, L.B., Pagliosa, C., Aneziris, C.G., Pandolfelli, V.C. (2018)
MgO fumes as a potential binder for in situ spinel containing refractory castables, Ceramics International, Vol. 44, Iss. 13, September 2018, pp. 15453-15463,
Storti, E., Jankovský, O., Colombo, P., Aneziris, C.G. (2018)
Effect of heat treatment conditions on magnesium borate fibers prepared via electrospinning, Journal of the European Ceramic Society, Vol. 38, Iss. 11, September 2018, pp. 4109-4117,
Luchini, B., Grabenhorst, J., Fruhstorfer, J., Pandolfelli, V.C., Aneziris, C.G. (2018)
On the nonlinear behavior of Young’s modulus of carbon-bonded alumina at high temperatures. Journal of the American Ceramic Society, Vol. 101, Iss. 9, September 2018, pp. 4171-4183,
Storti, E., Berek, H., Aneziris, C.G. (2018)
Focused ion beam preparation and microscopy investigation of secondary layer on carbon-bonded alumina filter after steel contact, Ceramics International, Vol. 44, Iss. 12, August 2018, pp. 14502-14509,
Zielke, H., Abendroth, M., Kuna, M., Kiefer, B. (2018)
Determining the fracture toughness of ceramic filter materials using the miniaturized Chevron-notched beam method at high temperature, Ceramics International, Vol. 44, Iss. 12, August 2018, pp. 13986-13993,
Luchini, B., Hubálková, J., Wetzig, T., Grabenhorst, J., Fruhstorfer, J., Pandolfelli, V.C., Aneziris, C.G. (2018)
Carbon-bonded alumina foam filters produced by centrifugation: A route towards improved homogeneity, Ceramics International, Vol. 44, Iss. 12, August 2018, pp. 13832-13840,
Vijay, D., Goetze, P., Wulf, R., Gross, U. (2018)
Homogenized and pore-scale analyses of forced convection through open cell foams, International Journal of Heat and Mass Transfer, Vol. 123, August 2018, pp. 787-804,
Becker, H., Leineweber, A. (2018)
Approximate icosahedral symmetry of α-Al(Fe,Mn,Cr)Si in electron backscatter diffraction analysis of a secondary Al-Si casting alloy, Materials Characterization, Vol. 141, July 2018, pp. 406-411,
Voigt, C., Ditscherlein, L., Werzner, E., Nowak, R., Peuker, U., Sobczak, N., Aneziris, C.G. (2018)
Wettability of AlSi7Mg alloy on alumina, spinel, mullite and rutile and its influence on the aluminum melt filtration efficiency, Journal of Materials & Design, Vol. 150, July 2018, pp. 75-85,
Gehre, P., Schmidt, A., Dudczig, S., Hubálková, J., Aneziris, C.G., Child, N., Delaney, I., Rancoule, G., DeBastiani, D. (2018)
Interaction of slip- and flame-spray coated carbon-bonded alumina filters with steel melts, Journal of the American Ceramic Society, Vol. 101, Iss. 7, July 2018, pp. 3222-3233,
Luz, A.P., Consoni, L.B., Pagliosa, C., Aneziris, C.G., Pandolfelli, V.C. (2018)
Sintering effect of calcium carbonate in high-alumina refractory castables, Ceramics International, Vol. 44, Iss. 9, June 2018, pp. 10486-10497,
Asad, A., Bauer, K., Chattopadhaya, K., Schwarze, R. (2018)
Numerical and experimental modeling of the recirculating melt flow inside an induction crucible furnace, Metallurgical and Materials Transactions B, Vol. 49, Iss. 3, June 2018, pp. 1378-1387,
Fruhstorfer, J., Dudczig, S., Rudolph, M., Schmidt, G., Brachhold, N., Schöttler, L., Rafaja, D., Aneziris, C.G. (2018)
Interface analyses between a case-hardened ingot casting steel and carbon-containing and carbon-free refractories, Metallurgical and Materials Transaction B, Vol 49, Iss. 3, June 2018, pp. 1499-1521,
Zienert, T., Fabrichnaya, O. (2018)
Experimental investigation and thermodynamic assessment of the Al-Fe system, Journal of Alloys and Compounds, Vol. 743, April 2018, pp. 795-811,
Yan, W., Schmidt, A., Dudczig, S., Wetzig, T., Wei, Y., Li, Y., Schafföner, S., Aneziris, C.G. (2018)
Wettability phenomena of molten steel in contact with alumina substrates with alumina and alumina-carbon coatings, Journal of the European Ceramic Society, Vol. 38, Iss. 4, April 2018, pp. 2164-2178,
Drehmann, R., Grund, T., Wielage, B., Wüstefeld, C., Motylenko, M., Rafaja, D. (2018)
Essential Factors Influencing the Bonding Strength of Cold-Sprayed Aluminum Coatings on Ceramic Substrates, Journal of Thermal Spray Technology, Vol. 27, Iss. 3, February 2018, pp. 446-455,
Luz, A.P., Gabriel, A.H.G., Consoni, L.B., Aneziris, C.G., Pandolfelli, V.C. (2018)
Self-reinforced high-alumina refractory castables, Ceramic International, Vol. 44, Iss. 2, Februar 2018, pp. 2364-2375,
Becker, H., Leineweber, A. (2018)
Atomic channel occupation in disordered η-Al5Fe2 and in two of its low-temperatures phases, η’’ and η’’’, Intermetallics, Vol. 93, February 2018, pp. 251-262,
Kietov, V., Henschel, S., Krüger, L. (2018)
Study of dynamic crack formation in nodular cast iron using the acoustic emission technique, Engineering Fracture Mechanics, Vol. 188, February 2018, pp. 58-69,
Liang, X., Li, Y., Sang, S., Xu, Y., Chen, Y., Li, B., Aneziris, C.G. (2018)
Enhanced mechanical properties of SiC reticulated porous ceramics via adjustment of residual stress within the strut, International Journal of Applied Ceramic Technology, Vol. 15, Iss. 1, January/February 2018, pp. 28-35,
Henschel, S., Kietov, V. Deirmina, F., Pellizzari, M., Krüger, L. (2018)
Fracture toughness of a hot work tool steel-TiC composite produced by mechanical milling and Spark Plasma Sintering, Material Science & Engineering A, Vol. 709, January 2018, pp. 152-159,
Fruhstorfer, J., Demuth, C., Götze, P., Aneziris, C.G., Ray, S., Groß, U., Trimis, D. (2018)
How the coarse fraction influences the microstructure and the effective thermal conductivity of alumina castables - an experimental and numerical study, Journal of the European Ceramic Society, Vol. 38, Iss. 1, January 2018, pp. 303-312,
Asad, A., Kratzsch, Ch., Schwarze, R. (2017)
Influence of drag closures and inlet conditions on bubble dynamics and flow behaviour inside a bubble column, Engineering Applications of Computational Fluid Mechanics, Vol. 11, Iss. 1, December 2017, pp. 127-141,
Weidner, A., Lippmann, T., Biermann, H. (2017)
Crack initiation in the very high cycle fatigue regime of nitrided 42CrMo4 steel, Journal of Materials Research, Vol. 32, Iss. 23, Focus Issue: Mechanical Properties and Microstructure of Advanced Metallic Alloys—in Honor of Prof. Haël Mughrabi PART A, December 2017, pp. 4305-4316,
Solarek, J., Aneziris, C.G., Biermann, H. (2017)
A new Method for Manufacturing Graded Refractories by Localized Hot Uniaxial Pressing, Ceramic International, Vol. 43, Iss. 17, December 2017, pp. 14636 - 14641,
Storti, E., Farhani, M., Aneziris, C.G., Wöhrmeyer, C., Parr, C. (2017)
Calcium aluminates reactive filter coatings on carbon-bonded alumina filters for clean steel approaches, Steel Research International, Vol. 88, Iss. 11, November 2017, pp. 1700247 (1-10),
Zienert, T., Leineweber, A., Fabrichnaya, O. (2017)
Heat capacity of Fe-Al intermetallics: B2-FeAl, FeAl2, Fe2Al5 and Fe4Al13, Journal of Alloys and Compounds, Vol. 725, November 2017, pp. 848-859,
Fruhstorfer, J., Aneziris, C.G. (2017)
Influence of particle size distributions on the density and density gradients in uniaxial compacts, Ceramics International, Vol. 43, Iss. 16, November 2017, pp. 13175-13184,
Knüpfer, P., Ditscherlein, L., Peuker, U.A. (2017)
Nanobubble enhanced agglomeration of hydrophobic powders, Colloids and Surfaces A, Vol. 530, October 2017, pp. 117-123,
Luz, A.P., Gagliarde, J.H., Aneziris, C.G., Pandolfelli, V.C. (2017)
B4C mineralizing role for mullite generation in Al2O3-SiO2 refractory castable, Ceramics International, Vol. 43, Iss. 15, October 2017, pp. 12167–12178,
Liang, X., Li, Y., Wang, Q., Sang, S., Xu, Y., Chen, Y., Li, B., Aneziris, C.G. (2017)
A nitride whisker template for growth of mullite in SiC reticulated porous ceramics, Ceramics International, Vol. 43, Iss. 14, October 2017, pp. 11197-11203,
Solarek, J., Himcinschi, C., Klemm, Y., Aneziris, C.G., Biermann, H. (2017)
Ductile behavior of fine-grained, carbon-bonded materials at elevated temperatures, Carbon, Vol. 122, October 2017, pp. 141–149,
Storti, E., Dudczig, S., Schmidt, A., Schmidt, G., Aneziris, C.G. (2017)
Filter functionalization with carbon nanotubes and alumina nanosheets for advanced steel filtration, Steel Research International, Vol. 88, Iss. 10, October 2017, pp. 1700142 (1-9),
Becker, H., Leineweber, A., Amirkhanyan, L., Kortus, J. (2017)
Powder-X-ray diffraction analysis of the crystal structure of the η′-Al8Fe3 (η′-2.67Fe) phase, Journal of Alloys and Compounds, Vol. 721, October 2017, pp. 691-696,
Zielke, H., Abendroth, M., Kuna, M. (2017)
Fracture toughness characterization of carbon bonded alumina using chevron notched specimens, Key Engineering Materials, Vol. 754, September 2017, pp. 71-74,
Hubálková, J., Voigt, C., Schmidt, A., Moritz, K., Aneziris, C.G. (2017)
Comparative phenomenological study of fracture behavior of ceramic and glass foams under compressive stress using in-situ X-ray microtomography, Advanced Engineeering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700286 (1-9),
Werzner, E., Abendroth, M., Demuth, C., Settgast, C. Trimis, D., Krause, H., Ray, S. (2017)
Influence of foam morphology on effective properties related to metal melt filtration, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700240 (1-10),
Demuth, C., Werzner, E., Mendes, M.A.A., Krause, H., Trimis, D., Ray, S. (2017)
Non-isothermal simulations of aluminum depth filtration, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700238 (1-11),
Henschel, S., Gleinig, J., Lippmann, T., Dudczig, S., Aneziris C.G., Biermann, H., Krüger, L., Weidner, A. (2017)
Effect of crucible material for ingot casting on detrimental non-metallic inclusions and the resulting mechanical properties of 18CrNiMo7-6 steel, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700199 (1-12),
Schmidt, A., Salomon, A., Dudczig, S., Berek, H., Rafaja, D., Aneziris, C.G. (2017)
Functionalized Carbon-Bonded Filters with an Open Porous Alumina Coating: Impact of Time on Interactions and Steel Cleanliness, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700170 (1-12),
Dietrich, B., Becker, H., Smolka, M., Keßler, A., Leineweber, A., Wolf, G. (2017)
Intermetallic sludge formation in Fe containing secondary Al-Si alloys influenced by Cr and Mn as preparative tool for metal melt filtration, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700161 (1-7),
Storti, E., Dudczig, S., Hubálková, J., Gleinig, J., Weidner, A., Biermann, H., Aneziris, C.G. (2017)
Impact of Nanoengineered Surfaces of Carbon-Bonded Alumina Filters on Steel Cleanliness, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700153 (1-10),
Schröder, C., Fischer, U., Schmidt, A., Schmidt, G., Volkova, O., Aneziris, C.G. (2017)
Interactions between exogenous magnesia inclusions with endogenous inclusions in a high alloyed steel melt, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700146 (1-9),
Rudolph, M., Salomon, A., Schmidt, A., Motylenko, M., Zienert, T., Stöcker, H., Himcinschi, C., Amirkhanyan, L., Kortus, J., Aneziris, C.G., Rafaja, D. (2017)
Thermally Induced Formation of Transition Aluminas from Boehmite, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700141 (1-10),
Salomon, A., Voigt, C., Fabrichnaya, O., Aneziris, C.G., Rafaja, D. (2017)
Formation of Corundum, Magnesium Titanate and Titanium(III) Oxide at the Interface between Rutile and Molten Al or AlSi7Mg0.6 Alloy, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700106 (1-8),
Ditscherlein, L., Schmidt, A., Storti, E., Aneziris, C.G., Peuker, U.A. (2017)
Impact of the roughness of alumina and Al2O3-C substrates on the adhesion mechanisms in a model system, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700088 (1-11),
Asad, A., Werzner, E., Demuth, C., Dudczig, S., Schmidt, A., Ray, S., Aneziris, C.G., Schwarze, R. (2017)
Numerical modeling of flow conditions during steel filtration experiments, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700085 (1-10),
Fankhänel, B., Stelter, M., Voigt, C., Aneziris, C.G. (2017)
Interaction of AlSi7Mg with oxide ceramics, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700084 (1-8),
Abendroth, M., Werzner, E., Settgast, C., Ray, S. (2017)
An approach toward numerical investigation of the mechanical behaviour of ceramic foams during metal melt filtration processes, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700080 (1-10),
Zielke, H., Schmidt, A., Abendroth, M., Kuna, M., Aneziris, C.G. (2017)
Influence of the specimen manufacturing process on the strength of carbon bonded alumina (Al2O3‐C), Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700083 (1-7),
Settgast, C., Solarek, J., Klemm, Y., Abendroth, M., Kuna, M., Biermann, H. (2017)
Prediction of High Temperature Behavior of Open-Cell Ceramic Foams Using an Experimental-Numerical Approach, Advanced Engineering Materials, Vol. 19, Iss. 9, September 2017, pp. 1700082 (1-9),
Ilatovskaia, M., Savinykh, G., Fabrichnaya, O. (2017)
Thermodynamic description of the ZrO2 - TiO2 - Al2O3 system based on experimental data, Journal of the European Ceramic Society, Vol. 37, Iss. 10, August 2017, pp. 3461-3469,
Ilatovskaia, M., Fabrichnaya, O. (2017)
Thermodynamic description of the Ti-Al-O system based on experimental data, Journal of Phase Equilibria and Diffusion, Vol. 38, Iss. 4, June 2017, pp. 175-184,
Ditscherlein, L., Peuker, U.A. (2017)
Note: Production of stable colloidal probes for high-temperature atomic force microscopy applications, Review of Scientific Instruments, Vol. 88, Iss. 4, April 2017, pp. 046107 (1-4),
Abendroth, M. (2017)
FEM Analysis of Small Punch Tests, Key Engineering Materials, Vol. 734, April 2017, pp. 23-36,
Voigt, C., Jäckel, E., Taino, F., Zienert, T., Salomon, A., Wolf, G., Aneziris, C.G., LeBrun, P. (2017)
Filtration Efficiency of Functionalized Ceramic Foam Filters for Aluminum Melt Filtration, Metallurgical and Materials Transactions B, Vol. 48, February 2017, pp. 497-505,
Ditze, A., Scharf, C. (2017)
Experimental measurements in melting ingots in the melt of the same material, International Journal of Thermal Sciences, Vol. 112, February 2017, pp. 211-221,
Knüpfer, P., Fritzsche, J., Leistner, T., Rudolph, M., Peuker, U.A. (2017)
Investigating the removal of particles from the air/water-interface – Modelling detachment forces using an energetic approach, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 513, January 2017, pp. 215-222,
Salomon, A., Zienert, T., Voigt, C., Dopita, M., Fabrichnaya, O., Aneziris, C.G., Rafaja, D. (2017)
Formation of different alumina phases and magnesium aluminate spinel during contact of molten AlSi7Mg0.6 alloy with mullite and amorphous silica, Journal of Corrosion Science, Vol. 114, January 2017, pp. 79-87,
Settgast, C., Abendroth, M., Kuna, M. (2016)
Fracture Mechanical Analysis of Open Cell Ceramic Foams Under Thermal Shock Loading, Journal of Multiscale Modelling, Vol. 7, Iss. 4, December 2016, pp. 1640006 (1-6),
Zielke, H., Abendroth, M., Kuna, M. (2016)
Determining fracture mechanical properties for brittle materials using the ball on three balls test combined with numerical simulations, Theoretical and Applied Fracture Mechanics, Vol. 86, Part A, December 2016, pp. 19-24,
Asad, A., Kratzsch, Ch., Dudczig, S., Schwarze, R., Aneziris, C.G. (2016)
Numerical study of particle filtration in an induction crucible furnace, International Journal of Heat and Fluid Flow, Vol. 62, Part B, December 2016, pp. 299-312,
Fritzsche, J., Peuker, U.A. (2016)
Modeling adhesive forces caused by nanobubble capillary bridging, Colloid and Surfaces A: Physicochemical and Engineering Aspects, Vol. 509, November 2016, pp. 457-466,
Mendes, M., Roessger, P., Gross, U., Wulf, R., Trimis, D., Ray, S., Goetze, P., Talukdar, P., Werzner, E., Demuth, C (2016)
Measurement and simplified numerical prediction of effective thermal conductivity of open-cell ceramic foams at high temperature, International Journal of Heat and Mass Transfer, Vol. 102, November 2016, pp. 396-406,
Henschel, S., Dudczig, S., Krüger, L., Aneziris, C.G. (2016)
Effect of non-metallic inclusions and shrinkage cavities on the dynamic fracture toughness of a high-strength G42CrMo4 cast steel, Procedia Structural Integrity, Vol. 2, 2016, pp. 358-365,
Henschel, S., Krüger, L. (2016)
Crack initiation at high loading rates applying the four-point bending split Hopkins pressure bar technique, International Journal of Fracture, Vol. 201, Iss. 2, October 2016, pp. 235-248,
Zienert, T., Amirkhanyan, L., Seidel, J., Wirnata, R., Weissbach, T., Gruber, T., Fabrichnaya, O., Kortus, J. (2016)
Heat capacity of η-AlFe (Fe2Al5), Intermetallics, Vol. 77, October 2016, pp. 14-22,
Zielke, H., Abendroth, M., Kuna, M. (2016)
Determination of fracture and damage mechanical properties of ceramic filter materials using miniaturized specimens, Key Engineering Materials, Vol. 713, September 2016, pp. 70-73,
Liang, S., Li, Y., Liu, J., Sang, S., Chen, Y, Li, B., Aneziris, C.G. (2016)
Fabrication of SiC reticulated porous ceramics with multi-layered struts for porous media combustion, Ceramics International, Vol. 42, Iss. 11, August 2016, pp. 13091-13097,
Storti, E., Roso, M., Modesti, M., Aneziris, C.G., Colombo, P. (2016)
Preparation and morphology of magnesium borate fibers via electrospinning, Journal of the European Ceramic Society, Vol. 36, Iss. 10, August 2016, pp. 2593-2599,
Weidner, A., Krewerth, D., Witschel, B., Emmel, M., Schmidt, A., Gleinig, J., Aneziris, C.G., Biermann, H. (2016)
Microstructure of non-metallic inclusions identified in cast steel 42CrMo4 after metal melt filtration by novel foam filters, Steel Research International, Vol. 87, Iss. 8, August 2016, pp. 1038-1053,
Storti, E., Dudczig, S., Emmel, M., Colombo, P., Aneziris, C.G. (2016)
Functional Coatings on Carbon-Bonded Ceramic Foam Filters for Steel Melt Filtration, Steel Research International, Vol. 87, Iss. 8, August 2016, pp. 1030-1037,
Ditscherlein, L., Fritzsche J., Peuker, U.A. (2016)
Study of nanobubbles on hydrophilic and hydrophobic alumina surfaces, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 497, May 2016, pp. 242–250,
Lehmann, H., Werzner, E., Degenkolb, C. (2016)
Optimizing In-Situ Data Compression for Large-Scale Scientific Simulations, in: Proceedings of the 24th High Performance Computing Symposium, Society for Computer Simulation International, SpringSim 2016: Spring Simulation Multiconference, Pasadena CA, USA, April 3 - 6, 2016, ISBN 978-1-5108-2318-1, April 2016, Article No. 5, pp. 1-8,
Solarek, J., Bachmann, J., Klemm, Y., Biermann, H., Aneziris, C.G. (2016)
High-temperature compression deformation behaviour of fine-grained carbon bonded alumina, Journal of the American Ceramic Society, Vol. 99, Iss. 4, April 2016, pp. 1390-1397,
Le Brun, P., Taina, F., Voigt, C., Jäckel, E., Aneziris, C.G. (2016)
Assessment of Active Filters for High Quality Aluminium Cast Products, in: Williams E. (eds) Light Metals 2016, John Wiley & Sons, Inc., Hoboken, NJ, USA, pp. 785-789,
Krewerth, D., Lippmann, T, Weidner, A., Biermann, H. (2016)
Influence of non-metallic inclusions on fatigue life in the very high cycle fatigue regime, International Journal of Fatigue, Vol. 84, March 2016, pp. 40-52,
Sarkar, N., Lee, K.S., Park, J.P., MaԹder, S., Aneziris, C.G., Kim, I.J. (2016)
Mechanical and thermal properties of highly porous Al2TiO5–Mullite ceramics, Ceramics International, Vol. 42, Iss. 2, Part B, February 2016, pp. 3548-3555,
Dreval, L., Zienert, T., Fabrichnaya, O. (2016)
Calculated phase diagrams and thermodynamic properties of the Al2O3-Fe2O3-FeO system, Journal of Alloys and Compounds, Vol. 657, February 2016, pp. 192-214,
Storti, E., Dudczig, S., Schmidt, G., Colombo, P., Aneziris, C.G. (2016)
Short-time performance of MWCNTs-coated Al2O3-C filters in a steel melt, Journal of the European Ceramic Society, Vol. 36, Iss. 3, February 2016, pp 857-866,
Fritzsche, J., Peuker, U.A. (2016)
Modeling adhesive force distributions on highly rough surfaces, Powder Technology, Vol. 289, February 2016, pp. 88-94,
Henschel, S., Krüger, L. (2016)
Modelling of crack initiation in a G42CrMo4 steel with non-metallic inclusions, Steel Research International, Vol. 87, Iss. 1, January 2016, pp. 29-36,
Storm, J., Abendroth, M., Kuna, M. (2016)
Numerical and analytical solutions for anisotropic yield surfaces of the open-cell Kelvin foam, International Journal of Mechanical Sciences, Vol. 105, January 2016, pp. 70-82,
Settgast, C., Abendroth, M., Kuna, M. (2016)
Fracture mechanical analysis of open cell ceramic foams under multi axial mechanical loading, Archiv of Applied Mechanics, Vol. 86, Iss. 1-2, January 2016, pp. 335-349,
Moritz, K., Ballaschk, U., Schmidt, G., Hubalkova, J., Aneziris, C.G. (2016)
Oxide ceramics with unidirectional pore channels by electrophoretic deposition, Journal of the European Ceramic Society, Vol. 36, Iss. 2, January 2016, pp. 333-341,
Zhang, D., Abendroth, M., Kuna, M., Storm, J. (2015)
Multi-axial brittle failure criterion using Weibull stress for open Kelvin cell foams, International Journal of Solids and Structures, Vol. 75-76, December 2015, pp. 1-11,
Vijay, D., Goetze, P., Wulf, R., Gross, U. (2015)
Forced convection through open cell foams based on homogenization approach: Steady state analysis, International Journal of Thermal Science, Vol. 98, December 2015, pp. 381-394,
Vijay, D., Goetze, P., Wulf, R., Gross, U. (2015)
Forced convection through open cell foams based on homogenization approach: Transient analysis, International Journal of Thermal Science, Vol. 98, December 2015, pp. 395-408,
Henschel, S., Krüger, L. (2015)
Dynamic crack initiation measurements in a four-point split Hopkinson bending device, Engineering Fracture Mechanics, Vol. 133, Supl. 1, January-December 2015, pp. 62-75,
Fritzsche, J., Peuker, U.A. (2015)
Wetting and adhesive forces on rough surfaces - An experimental and theoretical study, Procedia Engineering, Vol. 102, 2015, pp. 45-53,
Krewerth, D., Lippmann, T., Weidner, A., Biermann, H. (2015)
Application of full-surface view in situ thermography measurements during ultrasonic fatigue of cast steel G42CrMo4, International Journal of Fatigue, Vol. 80, November 2015, pp. 459-467,
Sarkar, N., Park, J.G., MaԹder, S., Aneziris, C.G., Kim, I.J. (2015)
Processing of particle stabilized Al2TiO5-ZrTiO4 foam to porous ceramics, Journal of the European Ceramic Society, Vol. 35, Iss. 14, November 2015, pp. 3969-3976,
Heuzeroth, F., Fritzsche, J., Werzner, E., Mendes, M. A. A., Peuker, U.A., Ray, S., Trimis, D. (2015)
Viscous force - An important parameter for the modelling of deep bed filtration in liquid media, Powder Technology, Vol. 283, October 2015, pp. 190-198,
Henschel, S., Krüger, L. (2015)
Effect of inhomogeneous distribution of non-metallic inclusions on crack path deflection in G42CrMo4 steel at different loading rates, Frattura Ed Integrità Strutturale (Fracture and Structural Integrity), Vol. 9, Iss. 34, October 2015, pp. 326-333,
Schwarze, R., Haubold, D., Kratzsch, C. (2015)
Numerical study of effects of pour box design on tundish flow characterisation, Ironmaking and Steelmaking, Vol. 42, Iss. 2, 2015, pp. 148-153,
Henschel, S., Krüger, L. (2015)
Deflection measurement in low-blow Charpy impact tests, Materials Testing, Vol. 57, Iss. 10, September 2015, pp. 837-842,
Henschel, S., Krüger, L. (2015)
Crack initiation at high loading rates applying the four-point bending split Hopkins pressure bar technique, EPJ Web of Conferences, Vol. 94, September 2015, DYMAT 2015, pp. 01028 (1-6),
Sarkar, N., Park, J.G., MaԹder, S., Pokhrel, A., Aneziris, C.G., Kim, I.J. (2015)
Influence of amphiphile on foam stability of Al2O3-SiO2 colloidal suspension to porous ceramics, Journal of Ceramic Processing Research, Vol. 16, Iss. 4, August 2015, pp. 392-396,
Storm, J., Abendroth, M., Kuna, M.E., Aneziris, C.G. (2015)
Influence of curved struts, anisotropic pores and strut cavities on the effective elastic properties of open-cell foams, Mechanics of Materials, Vol. 86, July 2015, pp. 1-10,
Moritz, K., Aneziris, C.G. (2015)
Electrophoretic method for fabricating porous materials – application to different oxide materials, Key Engineering Materials, Vol. 654, July 2015, pp. 101-105,
Fankhänel, B., Stelter, M., Voigt, C., Aneziris, C.G. (2015)
Wettability of AlSi5Mg on spodumene, Metallurgical and Materials Transaction B, Vol. 46, Iss. 3, June 2015, pp. 1535-1541,
Sarkar, N., Park, J.G., MaԹder, S., Pokhrel, A., Aneziris, C.G., Kim, I.J. (2015)
Al2TiO5–mullite porous ceramics from particle stabilized wet foam, Ceramics International, Vol. 41, Iss. 4 Part A, June 2015, pp. 6306-6311,
Storti, E., Emmel, M., Dudczig, S., Colombo, P., Aneziris, C.G. (2015)
Development of multi-walled carbon nanotubes-based coatings on carbon-bonded alumina filters for steel melt filtration, Journal of European Ceramic Society, Vol. 35, Iss. 5, May 2015, pp. 1569-1580,
Teichmann, J., v.d. Boogaart, K.G. (2015)
Cluster models for random particle aggregates - Morphological statistics and collision distance. Spatial Statistics, Vol. 12, May 2015, pp. 65-80,
Voigt, C., Aneziris, C.G., Hubálková, J. (2015)
Rheological characterization of slurries for the preparation alumina foams via replica technique, Journal of the American Ceramic Society, Vol. 98, Iss. 5, May 2015, pp. 1460-1463,
Sarkar, N., Park, J.G., MaԹder, S., Pokhrel, A., Aneziris, C.G., Kim, I.J. (2015)
Effect of Amphiphile Chain Length on Wet Foam Stability of Porous Ceramics, Ceramics International, Vol. 41, Iss. 3 Part A, April 2015, pp. 4021-4027,
Kratzsch, C., Timmel, K., Eckert, S., Schwarze, R. (2015)
URANS Simulation of Continuous Casting Mold Flows: Assessment of Revised Turbulence Models, Steel Research International, Vol. 86, Iss. 4, April 2015, pp. 400-410,
Voigt, C., Fankhänel, B., Jäckel, E., Aneziris, C.G., Stelter, M., Hubálková, J. (2015)
Effect of the filter surface chemistry on the filtration of aluminum, Metallurgical and Materials Transactions B, Vol. 46, Iss. 2, April 2015, pp. 1066-1072,
Zienert, T., Fabrichnaya, O. (2015)
Interface reactions between steel 42CrMo4 and mullite, Journal of the European Ceramic Society, Vol. 35, Iss. 4, April 2015, pp. 1317-1326,
Saboor Bagherzadeh, E., Dopita, M., Mütze, T., Peuker, U.A. (2015)
Morphological and structural studies on Al reinforced by Al2O3 via mechanical alloying, Journal of Advance Powder Technology, Vol. 26, Iss. 2, March 2015, pp. 487-493,
Zienert, T., Dudczig, S., Fabrichnaya, O., Aneziris, C.G. (2015)
Interface reactions between liquid iron and alumina-carbon refractory filter materials, Ceramics International, Vol. 41, Iss. 2, Part A, March 2015, pp. 2089-2098,
Salomon, A., Emmel, M., Dopita, M., Dudczig, S., Aneziris, C.G., Rafaja, D. (2015)
Reaction mechanism between the carbon bonded magnesia coatings deposited on carbon bonded alumina and a steel melt, Journal of the European Ceramic Society, Vol. 35, Iss. 2, February 2015, pp. 795-802,
Heuzeroth, F., Fritzsche, J., Peuker, U.A. (2015)
Wetting and its influence on the filtration ability of ceramic foam filters, Particuology, Vol. 18, February 2015, pp. 50-57,
Götze, P., Mendes, M.A.A., Assad, A., Jorschick, H., Werzner, E., Wulf, R., Trimis, D., Gross, U., Ray. S. (2015)
Sensitivity Analysis of Effective Thermal Conductivity of Open-Cell Ceramic Foams Using a Simplified Model Based on Detailed Structure, Special Topics & Reviews in Porous Media: An International Journal, Vol. 6, Iss. 1, 2015, pp. 1-10,
Dopita, M., Emmel, M., Salomon, A., Rudolph, M., Matej, Z., Aneziris, C.G., Rafaja, D. (2015)
Temperature evolution of microstructure of turbostratic high melting coal-tar synthetic pitch studied using wide-angle X-ray scattering method, Carbon, Vol. 81, January 2015, pp. 272-283,
Dudczig, S., Aneziris, C.G., Emmel, M., Hubálková, J., Schmidt, G., Berek, H. (2014)
Characterization of carbon bonded alumina filters with active or reactive coatings in a steel casting simulator, Ceramics International, Vol. 40, Iss. 10, Part B, December 2014, pp. 16727-16742,
Gladkyy, A., Schwarze, R. (2014)
Comparison of Different Capillary Bridge Models for Application in the Discrete Element Method, Granular Matter, Vol. 16, Iss. 6, December 2014, pp. 911-920,
Wulf, R., Mendes, M.A.A., Skibina, V., Al-Zoubi, A., Trimis, D., Ray, S., Gross, U. (2014)
Experimental and Numerical Determination of Effective Thermal Conductivity of Open Cell FeCrAl-alloy Metal Foams, International Journal of Thermal Sciences, Vol. 86, December 2014, pp. 95-103,
Lehmann, H, Lenk, M., Jung, B. (2014)
Adding Interlacing to In-Situ Data Compression for Multi-Resolution Visualization of Large-Scale Scientific Simulations, in: International Conference on Artificial Reality and Telexistence & Eurographics Symposium on Virtual Environments - ICAT-EGVE 2014, December 8-10, 2014, Bremen, Posters and Demos, eds.: Y. Hashimoto, T. Kuhlen, F. Argelaguet, T. Hoshi, M. E. Latoschik, The Eurographics Association, ISBN 978-3-905674-77-4, pp. 5-6 (2014),
Lehmann, H., Jung, B. (2014)
In-situ multi-resolution and temporal data compression for visual exploration of large-scale scientific simulations, IEEE 4th Symposium on Large Data Analysis and Visualization - LDAV 2014, November 9-10, 2014 Paris, France, Best Paper Honorable Mention, 2014, pp. 51-58,
Werner, J., Aneziris, C.G., Schafföner, S. (2014)
Influence of porosity on Young's modulus of carbon-bonded alumina from room temperature up to 1450°C, Ceramics International, Vol. 40, Iss. 9, Part A, November 2014, pp. 14439–14445,
Krüger, L., Trubitz, P., Henschel, S. (2014)
Bruchmechanisches Verhalten unter quasi-statischer und schlagartiger Beanspruchung, in: Moderne Methoden der Werkstoffprüfung, Biermann, H., Krüger, L. (Eds.), Wiley-VCH Verlag Weinheim, 2014, ISBN 978-3-527-33413-1, pp. 1-52,
C04 / Weidner, A., Krewerth, D., Biermann, H. (2014)
Ermüdung bei sehr hohen Zyklenzahlen (VHCF), in: Moderne Methoden der Werkstoffprüfung, Biermann, H., Krüger, L. (Eds.), Wiley-VCH Verlag Weinheim, 2014, ISBN 978-3-527-33413-1, pp. 83-120,
Berek, H., Hubálková, J., Aneziris, C.G. (2014)
Röntgen-Tomografie, in: Moderne Methoden der Werkstoffprüfung, Biermann, H., Krüger, L. (Eds.), Wiley-VCH Verlag Weinheim, 2014, ISBN 978-3-527-33413-1, pp. 353-385,
Mendes, M.A.A., Skibina, S., Talukdar, P., Wulf, R., Trimis, D., Gross, U., Ray, R. (2014)
Experimental validation of simplified conduction-radiation models for evaluation of effective thermal conductivity of open-cell metal foams at high temperatures, International Journal of Heat and Mass Transfer, Vol. 78, November 2014, pp. 112-120,
Fritzsche, J., Peuker, U.A. (2014)
Particle adhesion on highly rough hydrophobic surfaces: The distribution of interaction mechanisms, Colloids and Surfaces A: Physicochemical and Engineering Aspects, Vol. 459, October 2014, pp. 166-171,
Emmel, M., Sponza, F., Dudczig, S., Aneziris, C.G., Colombo, P. (2014)
In situ Spinel Formation in Al2O3-MgO-C Filter Materials for Steel Melt Filtration, Ceramics International, Vol. 40, Iss. 8, Part B, September 2014, pp. 13507-13513,
Soltysiak, S., Selent, M., Roth, S., Abendroth, M., Hoffmann, M., Biermann, H., Kuna, M. (2014)
High-temperature small punch test for mechanical characterization of a nickel-base super-alloy, Materials Science & Engineering A, Vol. 613, September 2014, pp. 259-263,
Storm, J., Abendroth, M., Kuna, M. (2014)
Geometry dependent effective heat conductivity of open-cell foams based on Kelvin cell models, Proceedings of the Unified International Technical Conference on Refractories (Unitecr 2013), September 10-13, 2013, Victoria, Canada, eds. D.G. Goski and J.D. Smith, ISBN 9781118837030, pp. 897-902 (2014),
Voigt, C., Aneziris, C.G. (2014)
Functional Coatings on Alumina Foam Ceramics made of Alumina for Aluminum Filtration, Proceedings of the Unified International Technical Conference on Refractories (Unitecr 2013), September 10-13, 2013, Victoria, Canada, eds. D.G. Goski and J.D. Smith, ISBN 9781118837030, pp. 1315-1320 (2014),
Klemm, Y., Biermann, H., Aneziris, C.G. (2014)
Different Fabrication Routes for Carbon-Bonded Al2O3-C and their Influence on the Physical and Mechanical Properties, Proceedings of the Unified International Technical Conference on Refractories (Unitecr 2013), September 10-13, 2013, Victoria, Canada, eds. D.G. Goski and J.D. Smith, ISBN 9781118837030, pp. 591-596 (2014),
Emmel, M., Aneziris, C.G. (2014)
Development of active and reactive carbon-bonded filters for steel melt filtration, Proceedings of the Unified International Technical Conference on Refractories (Unitecr 2013), September 10-13, 2013, Victoria, Canada, eds. D.G. Goski and J.D. Smith, ISBN 9781118837030, pp. 565-570 (2014),
Werner, J., Aneziris, C.G. (2014)
Contribution of Different Binder Systems to Young's Modulus of Elasticity of Carbon-Bonded Alumina at elevated Temperatures, Proceedings of the Unified International Technical Conference on Refractories (Unitecr 2013), September 10-13, 2013, Victoria, Canada, eds. D.G. Goski and J.D. Smith, ISBN 9781118837030, pp. 147-152 (2014),
Soltysiak, S., Abendroth, M., Kuna, M. (2014)
Influence of the Carbores content on the strength of carbon bonded alumina obtained by means of Small Punch Test, Proceedings of the Unified International Technical Conference on Refractories (Unitecr 2013), September 10-13, 2013, Victoria, Canada, eds. D.G. Goski and J.D. Smith, ISBN 9781118837030, pp. 135-140 (2014),
Götze, P., Vijay, D., Jäckel, E., Wulf, R., Gross, U. (2014)
Experimental Determination of Convective Heat Transfer Coefficients During Molten Aluminum Purification Using Open-Cell Alumina (Al2O3) Ceramics, in: International Heat Transfer Conference 15, IHTC-15, August 10-15, 2014, Kyoto, Japan, ed. A. Bar-Cohen, N. Kasagi and H. Yoshida, ISBN 978-1-56700-421-2, 2014, pp. 3139-3152,
Vijay, D., Goetze, P., Wulf, R., Gross, U. (2014)
Volumetric heat transfer determination for forced convection of air through alumina (Al2O3) foam, in: International Heat Transfer Conference 15, IHTC-15, August 10-15, 2014, Kyoto, Japan, ed. A. Bar-Cohen, N. Kasagi and H. Yoshida, ISBN 978-1-56700-421-2, 2014, pp. 3115-3128,
Mendes, M.A.A., Ray, S., Trimis, D. (2014)
An improved model for the effective thermal conductivity of open-cell porous foams, International Journal of Heat and Mass Transfer, Vol. 75, August 2014, pp. 224-230,
Soltysiak, S., Abendroth, Kuna, M., Klemm, Y., Biermann, H. (2014)
Strength of fine grained carbon-bonded alumina (Al2O3-C) materials obtained by means of the small punch test, Ceramics International, Vol. 40, Iss. 7, Part A, August 2014, pp. 9555-9561,
Henschel, S., Krüger, J. (2014)
Effect of non-metallic inclusions on the local mechanical behaviour of a G42CrMo4 casting, MATEC Web of Conferences, Vol. 12, 2014, FDMD II, pp. 04007 (1-3),
Voigt, C., Zienert, T., Schubert, P, Aneziris, C.G., Hubálková, J. (2014)
Reticulated porous foam ceramics with different surface chemistrys, Journal of the American Ceramic Society, Vol. 97, Iss. 7, July 2014, pp. 2046-2053,
Heuzeroth, F., Fritzsche, J., Peuker, U.A. (2014)
Raster-Kraft-Mikroskopie zur Evaluation der Abscheideeffizienz bei der Metallschmelzefiltration, Chemie Ingenieur Technik – Sonderheft „Aufbereitungstechnik“, Vol. 86, Iss. 6, June 2014, pp. 874-882,
Krewerth, D., Weidner, A., Biermann, H. (2014)
Fatigue crack initiation and damage mechanisms during ultrasonic fatigue testing of cast aluminium alloy AlSi7Mg, MATEC Web of Conferences, Vol. 12, June 2014, FDMD II, pp. 10005 (1-3),
Amirkhanyan, J., Weissbach, T., Gruber, Th., Kortus, J., Zienert, T., Fabrichnaya, O. (2014)
Thermodynamic investigation of Al-Fe-Si intermetallic ternary phases: A Density - Functional Theory Study, Journal of Alloys and Compounds, Vol. 598, June 2014, pp. 137-141,
Mendes, M.A.A., Ray, S., Trimis., D. (2014)
Evaluation of Effective Thermal Conductivity of Porous Foams in Presence of Arbitrary Working Fluid, International Journal of Thermal Science, Vol. 79, May 2014, pp. 260-265,
Amirkhanyan, L., Weißbach, T., Kortus, J., Aneziris, C.G. (2014)
On the possibility of hercynite formation in a solid state reaction at the Al2O3-iron interface: A density-functional theory study, Ceramics International, Vol. 40, Iss. 1, Part A, January 2014, pp. 257-262,
Röder, C, Weißbach, T., Kortus, J., Himcinschi, C., Dudczig, S., Aneziris, C.G. (2014)
Raman spectroscopic characterization of novel carbon-bonded filter compositions for steel melt filtration, Journal of Raman Spectroscopy, Vol. 45, Iss. 1, January 2014, pp. 128-132,
Mendes, M.A.A., Talukdar, P., Ray, S., Trimis, D. (2014)
Detailed and Simplified Models for Evaluation of Effective Thermal Conductivity of Open-Cell Porous Foams at High Temperatures in Presence of Thermal Radiation, International Journal of Heat and Mass Transfer, Vol. 68, January 2014, pp. 612-624,
Krewerth, D., Weidner, A., Biermann, H. (2013)
Application of In Situ Thermography for Evaluating the High-Cycle and Very High-Cycle Fatigue Behaviour of Cast Aluminium Alloy AlSi7Mg (T6), Ultrasonics Journal, Vol. 53. Iss. 8, December 2013, pp. 1441-1449,
Werzner, E., Mendes, M.A.A., Ray, S., Trimis, D. (2013)
Numerical Investigation on the Depth Filtration of Liquid Metals: Influence of Process Conditions and Inclusion Properties, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1307-1314,
Fritzsche, J., Teichmann, J., Heuzeroth, F., van den Boogaart, K.G., Peuker, U.A. (2013)
Impact of wetting to the agglomeration of dispersed particles in an aqueous medium, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1299-1306,
Zienert, T., Fabrichnaya, O. (2013)
Phase relations in the A356 alloy: experimental study and thermodynamic calculations, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1244-1250,
Storm, J., Abendroth, M, Zhang, D., Kuna, M. (2013)
Geometry dependent effective elastic properties of open-cell foams based on Kelvin cell models, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1292-1298,
Dopita, M., Rudolph, M., Emmel, M., Salomon, A., Aneziris, C.G., Rafaja, D. (2013)
Simulations of X-ray scattering on two dimensional, graphitic and turbostratic carbon structures, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1280-1291,
Dopita, M., Rudolph, M., Emmel, M., Salomon, A., Aneziris, C.G., Rafaja, D. (2013)
Simulations of X-ray scattering on two dimensional, graphitic and turbostratic carbon structures, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1280-1291,
Götze, P., Wulf, R., Groß, U., Dopita, M., Rafaja, D., Dudczig, S., Aneziris, C. G., Klemm, Y, Biermann, H. (2013)
Thermophysical Properties of Pressed and Casted Carbon Bonded Alumina (Al203-C) up to 800°C, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1270-1279,
Lehmann, H., Werzner, E., Mendes, M., Trimis, D., Jung, B. (2013)
In Situ Data Compression Algorithm for Detailed Numerical Simulation of Liquid Metal Filtration through Regularly Structured Porous Media, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1260-1269,
Krewerth, D., Weidner, A., Biermann, H. (2013)
Investigation of the damage behaviour of cast steel 42CrMo4 during ultrasonic fatigue by combination of thermography and fractography, Advanced Engineering Materials. Vol. 15, Iss. 12, December 2013, pp. 1251-1259,
Salomon, A., Emmel, M., Dudczig, S., Rafaja, D., Aneziris, C.G. (2013)
Dynamic, in situ generated interfaces between carbon-bonded alumina filters and steel during Spark Plasma Sintering/Field Assisted Sintering, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1235-1243,
Soltysiak, S., Abendroth, M., Kuna, M., Dudczig, S. (2013)
Influence of the Content of Modified Coal Tar Pitch Powder on the Strength of Carbon Bonded Alumina (Al2O3-C), Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1230-1234,
Klemm, Y., Biermann, H., Aneziris, C.G. (2013)
Influence of composition and coking temperature on the properties and microstructure of carbon bonded Al2O3-C filter materials, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1224-1229,
Henschel, S., Krewerth, D., Ballani, F., Weidner, A., Krüger, L., Biermann, H., Emmel, M., Aneziris, C.G. (2013)
Effect of filter coating on the quasi-static and cyclic mechanical properties of a G42CrMo4 casting, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1216-1223,
Salomon, A., Zienert, T., Voigt, C., Jäckel, E., Fabrichnaya, O., Rafaja, D., Aneziris, C.G. (2013)
Comparison of interfacial reactions between AlSi7Mg and alumina filter after casting and Spark Plasma Sintering, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1206-1215,
Voigt, C., Jäckel, J., Aneziris, C.G., Hubálková, J. (2013)
Spinel coating on alumina foam ceramics for aluminum filtration, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1197-1205,
Emmel, M., Aneziris, C.G., Schmidt, G., Krewerth, D., Biermann, H. (2013)
Influence of the chemistry of ceramic foam filters on the filtration of alumina based non-metallic inclusions, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1188-1196,
Dudczig, S., Aneziris, C.G., Dopita, M., Rafaja, D. (2013)
Application of oxide coatings for improved steel filtration with the aid of a metal casting simulator, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1177-1187,
Aneziris, C.G., Schröder, C., Fischer, U., Berek, H., Emmel, M., Kortus, J., Amirkhanyan, L.G. Weißbach, T. (2013)
Interactions between Exogenous Spinel Inclusions with Endogenous Inclusions in a Steel Melt, Advanced Engineering Materials, Vol. 15, Iss. 12, December 2013, pp. 1168-1176,
Krewerth, D., Weidner, A., Biermann, H. (2013)
A comparative study on infrared thermography during ultrasonic fatigue testing of cast steel 42CrMo4 and cast aluminium alloy AlSi7Mg, Key Engineering Materials, Vol. 592-593, November 2013, pp. 501-504,
Mendes, M.A.A., Ray, S., Trimis, D. (2013)
A simple and efficient method for the evaluation of effective thermal conductivity of open-cell foam-like structures, International Journal of Heat and Mass Transfer, Vol. 66, November 2013, pp. 412-422,
Soltysiak, S., Abendroth, M., Kuna, M., Dudczig, S. (2013)
Influence of the microstructure on the fracture behavior of carbon bonded alumina, Key Engineering Materials, Vol. 592-593, November 2013, pp. 279-282,
Aneziris, C.G., Roungos, V., Dudczig, S., Emmel, M. (2013)
Refractories with Improved Thermal Shock Performance Serving Low Carbon Economy, China's Refractories, Vol. 22, Iss. 3, 2013, pp. 7-11,
Voigt, C., Storm, J., Aneziris, C.G., Abendroth, M., Kuna, M., Hubálková, J. (2013)
The influence of the measurement parameters on the crushing strength of reticulated ceramic foams, Journal of Materials Research, Vol. 28, Iss. 17, September 2013, pp. 2288-2299,
Emmel, M., Aneziris, C.G. (2013)
Functionalization of carbon-bonded alumina filters through the application of active oxide coatings for the steel melt filtration, Journal of Materials Research, Vol. 28, Iss. 17, September 2013, pp. 2234-2242,
Laitinen, O., Bauer, K., Niinimäki, J., Peuker, U.A. (2013)
Validity of the Rumpf and the Rabinovich adhesion force models for alumina substrates with nanoscale roughness, Powder Technology, Vol. 246, September 2013, pp. 545-552,
Werner, J., Dudczig, S., Aneziris, C.G. (2013)
Young's modulus of elasticity of carbon bonded alumina materials up to 1450°C, Journal of the American Ceramic Society, Vol. 96, Iss. 9, September 2013, pp. 2958-2965,
Aneziris, C.G., Schroeder, C., Emmel, M., Schmidt, G., Heller, H. P., Berek, H. (2013)
In Situ Observation of Collision between Exogenous and Endogenous Inclusions on Steel Melts for Active Steel Filtration, Metallurgical and Materials Transactions B, Vol. 44, Iss. 4, August 2013, pp. 954-968,
Klemm, Y., Biermann, H., Aneziris, C.G. (2013)
Microstructure and mechanical properties of fine grained carbon-bonded Al2O3-C materials, Ceramics International, Vol. 39, Iss. 6, August 2013, pp. 6695-6702,
Aneziris, C.G., Roungos, V., Dudczig, S., Emmel, M. (2013)
Refractories with Improved Thermal Shock Performance Serving Low Carbon Economy, China's Refractories, Vol. 22, Iss. 3, 2013, pp. 7-11,
Voigt, C., Jäckel, E., Aneziris, C.G., Hubálková, J. (2013)
Investigations of reticulated porous alumina foam ceramics based on different coating techniques with the aid of µCT and statistical characteristics, Ceramics International, Vol. 39, Iss. 3, April 2013, pp. 2415-2422,
Teichmann, J., Ballani, F., van den Boogaart, K.G. (2013)
Generalizations of Matérn's hard-core point processes, Spatial Statistics, Vol. 3, February 2013, pp. 33-53,
Aneziris, C.G., Emmel, M., Stolle, A. (2012)
Multifunctional carbon bonded filters for metal melt filtration, Advances in Bioceramics and Porous Ceramics V, eds. R. Narayan, P. Colombo, M. Halbig and S. Mathur, ISBN 9781118205969, pp. 123-138 (2012),
Emmel, M., Aneziris, C.G. (2012)
Development of novel carbon bonded filter compositions for advanced steel melt filtration, Ceramics International, Vol. 38, Iss. 6, August 2012, pp. 5165-5172,