H. Biermann, C.G. Aneziris, A. Kolbe, U. Martin, A. Müller, W. Schärfl, M. Herrmann:
Microstructure and compression strength of novel TRIP-steel/Mg-PSZ composites,
.
D.M. Cupid, O. Fabrichnaya, F. Ebrahimi, H.J. Seifert:
Thermodynamic assessment of the Al–Mo system and of the Ti–A–Mo System from 0 to 20at.% Ti,
.
O. Fabrichnaya, G. Savinykh, G. Schreiber, M. Dopita, H.J. Seifert:
Experimental investigation and thermodynamic modelling in the ZrO2–L2O3–Y2O3 system,
.
O. Fabrichnaya, H.J. Seifert:
Thermodynamic assessment of the ZrO2–Y2O3–A2O3 system,
.
O. Fabrichnaya, G. Savinykh, G. Schreiber, H.J. Seifert:
Phase relations in the ZrO2–N2O3–Y2O3 system: experimental study and CALPHAD assessment,
.
S. Hausdorf, F. Baitalow, T. Böhle, D. Rafaja, Mertens, F. O. R. L.:
Main-group and transition-element IRMOF homologues,
.
C. Himcinschi, I. Vrejoiu, M. Friedrich, E. Nikulina, L. Ding, C. Cobet, N. Esser, M. Alexe, D. Rafaja, Zahn, D. R. T.:
Substrate influence on the optical and structural properties of pulsed laser deposited BiFeO3 epitaxial films,
.
L. Krüger, S. Wolf, U. Martin, S. Martin, P.R. Scheller, A. Jahn, A. Weiß:
The influence of martensitic transformation on mechanical properties of cast high alloyed CrMnNi-steel under various strain rates and temperatures,
.
L. Krüger, S. Wolf, S. Martin, M. Rüssel, U. Martin, A. Jahn, A. Weiß, P. Scheller:
Werkstoffverhalten einer TRIP/TWIP-fähigen CrMnNi-Stahlgusslegierung bis zu hohen Dehnraten*,
.
T. Marr, J. Freudenberger, A. Kauffmann, J. Scharnweber, C.‐G. Oertel, W. Skrotzki, U. Siegel, U. Kühn, J. Eckert, U. Martin, L. Schultz:
Damascene Light‐Weight Metals,
.
U. Martin, D. Ehinger, L. Krüger, S. Martin, T. Mottitschka, C. Weigelt, C.G. Aneziris, M. Herrmann:
Cellular Energy Absorbing TRIP-Steel/Mg-PSZ Composite: Honeycomb Structures Fabricated by a New Extrusion Powder Technology,
.
V. Matějka, M. Šupová, V. Klemm, D. Rafaja, M. Valášková, J. Tokarský, J. Lešková, E. Plevová:
Vermiculite interlayer as a reactor for CdS ultrafine particles preparation,
T. Mrotzek, U. Martin, A. Hoffmann:
High temperature deformation behavior of the molybdenum alloy TZM,
S. Oberhauser, C. Strobl, G. Schreiber, C. Wüstefeld, D. Rafaja:
Formation of periodic patterns in the (Ni,W)/Al diffusion couples,
.
R. Ohser-Wiedemann, U. Martin, H.J. Seifert, A. Müller:
Densification behaviour of pure molybdenum powder by spark plasma sintering,
.
Z. Pan, O. Fabrichnaya, G. Schreiber, H.J. Seifert, R.H. Baney, J.S. Tulenko:
Phase reaction of ceria in LPS–SiC with Al2O3 –Y2O3 and AlN–Y2O3 additives,
.
Z. Pan, O. Fabrichnaya, H.J. Seifert, R. Neher, K. Brandt, M. Herrmann:
Thermodynamic Evaluation of the Si-C-Al-Y-O System for LPS-SiC Application,
.
W. Pantleon, S. Richter, S. Martin, J.R. Bowen:
Texture evolution during tensile necking of copper processed by equal channel angular extrusion,
.
D. Rafaja, C. Wüstefeld, J. Kutzner, A.P. Ehiasarian, M. Šíma, V. Klemm, D. Heger, J. Kortus:
Magnetic response of (Cr,Al,Si)N nanocrystallites on the microstructure of Cr-Al-Si-N nanocomposites,
.
C. Schimpf, T. Mrotzek, U. Martin:
Thermally activated flow stress component of the Mo alloy TZM determined by constitutive models,
.
J. Tokarský, P. Čapková, V. Klemm, D. Rafaja, J. Kukutschová:
Adhesion of silver nanoparticles on the montmorillonite surface,
.
J. Tokarský, P. Čapková, D. Rafaja, V. Klemm, M. Valášková, J. Kukutschová, V. Tomášek:
Adhesion of silver nanoparticles on the clay substrates; modeling and experiment,
.
M. Valášková, M. Hundáková, K.M. Kutláková, J. Seidlerová, P. Čapková, E. Pazdziora, K. Matějová, M. Heřmánek, V. Klemm, D. Rafaja:
Preparation and characterization of antibacterial silver/vermiculites and silver/montmorillonites,
.
I. Wesemann, A. Hoffmann, T. Mrotzek, U. Martin:
Investigation of solid solution hardening in molybdenum alloys,
.
C. Wüstefeld, D. Rafaja, V. Klemm, C. Michotte, M. Kathrein:
Effect of the aluminium content and the bias voltage on the microstructure formation in Ti1−xAlxN protective coatings grown by cathodic arc evaporation,
.