M. Akhlaghi, R. Hock, J. Dallmann, A. Krapf, B. Merle, H. Hofsäss, C. Körner, A. Leineweber:
Gaseous nitriding of Co-10 at% and -15 at% Cr alloys at 400 °C and 450 °C,
.
M. Barasinski, J. Hilbig, S. Neumann, D. Rafaja, G. Garnweitner:
Simple model of the electrophoretic migration of spherical and rod-shaped Au nanoparticles in gels with varied mesh sizes,
.
H. Becker, N. Bulut, J. Kortus, A. Leineweber:
β-4.5FeSi: Hierarchical crystal and defect structure: Reconciling experimental and theoretical evidence including the influence of Al vs. Si ordering on the crystal structure,
.
H. Becker, B. Fankhänel, C. Voigt, A. Charitos, M. Stelter, C.G. Aneziris, A. Leineweber:
Interaction of Fe‐Containing, Secondary Al–Si Alloy with Oxide and Carbon‐Containing Ceramics for Fe Removal,
.
H. Becker, R. Hielscher, A. Leineweber:
Interplay between Habit Plane and Orientation Relationship in an Electron Backscatter Diffraction Analysis: Using the Example of η′-Al8Fe3 in η-Al5Fe2,
.
D. Chebykin, T. Dubberstein, H.-P. Heller, O. Fabrichnaya, O. Volkova:
Investigation of wetting behavior of Cr–Mn–Ni steels on hBN-SiC-ZrO2-substrate,
.
G. Chen, R. Rahimi, M. Harwarth, M. Motylenko, G. Xu, H. Biermann, J. Mola:
Non-cube-on-cube orientation relationship between M23C6 and austenite in an austenitic stainless steel,
.
J. Freudenberger, F. Thiel, D. Utt, K. Albe, A. Kauffmann, S. Seils, M. Heilmaier:
Solid solution strengthening in medium- to high-entropy alloys,
.
U. Gebhardt, T. Gustmann, L. Giebeler, F. Hirsch, J.K. Hufenbach, M. Kästner:
Additively manufactured AlSi10Mg lattices – Potential and limits of modelling as-designed structures,
.
M. Gude, P. Klimant, M. Putz, D. Rafaja, D. Weck, C. Wüstefeld:
AMARETO – Saxon Alliance for MAterial‐ and Resource‐Efficient TechnOlogies,
.
L. Haus, M. Wildfeuer, J.-E. Grochowski, J. Wöckel, M. Müller, F. Köhn, W. Schulz, C. Wüstefeld, D. Rafaja, J. Albrecht:
Wear properties of carbon-rich tungsten carbide films,
.
Q. Huang, C. Ullrich, J. Mola, M. Motylenko, L. Krüger, O. Volkova, A. Weiß, M. Wendler:
Quenching and partitioning (Q&P) processing of a (C+N)-containing austenitic stainless steel,
.
M. Ilatovskaia, O. Fabrichnaya:
Liquid Immiscibility and Thermodynamic Assessment of the Al2O3–T2–S2 System,
.
Y. Ivanisenko, A. Mazilkin, I. Gallino, S.S. Riegler, S. Doyle, A. Kilmametov, O. Fabrichnaya, M. Heilmaier:
On the formation of nanocrystalline aluminides during high pressure torsion of Al/Ni alternating foils and post-processing multilayer reaction,
.
S. Kante, M. Motylenko, A. Leineweber:
Nitriding of White‐Solidified Fe–C–Si Alloys: Diffusion Path Concept Applied to Inhomogeneous Microstructures,
.
F. Kochta, U. Kühn, S. Henschel, L. Giebeler, T. Gemming, K. Neufeld, C. Leyens, L. Krüger, J. Hufenbach:
Novel Fe-0.3Cr-0.4Mo-1.5Mn–3Ni-0.6C tool steel with superior properties under quasi-static and dynamic loading,
.
M.J. Kriegel, M.H. Wetzel, O. Fabrichnaya, D. Rafaja:
Binary Ti–Fe system. Part II: Modelling of pressure-dependent phase stabilities,
.
P. Krooß, C. Lauhoff, T. Gustmann, T. Gemming, C. Sobrero, F. Ewald, F. Brenne, T. Arold, M. Nematolahi, M. Elahinia, J. Thielsch, J. Hufenbach, T. Niendorf:
Additive Manufacturing of Binary Ni–Ti Shape Memory Alloys Using Electron Beam Powder Bed Fusion: Functional Reversibility Through Minor Alloy Modification and Carbide Formation,
.
U. Kühn, J. Sander, K.N. Gabrysiak, L. Giebeler, K. Kosiba, S. Pilz, K. Neufeld, A.V. Boehm, J.K. Hufenbach:
Approach to Estimate the Phase Formation and the Mechanical Properties of Alloys Processed by Laser Powder Bed Fusion via Casting,
.
J. Lachmann, M.J. Kriegel, A. Leineweber, S.-L. Shang, Z.-K. Liu:
Thermodynamic re-modelling of the Cu–Nb–Sn system: Integrating the nausite phase,
.
Le Feng, J. Freudenberger, K. Nielsch, T.G. Woodcock:
Elimination of the non-recrystallised regions in the extruded MnAl-C-Ni magnet using pulverised melt-spun ribbons,
.
D. Lehninger, F. Honeit, D. Rafaja, V. Klemm, C. Röder, L. Khomenkova, F. Schneider, J. von Borany, J. Heitmann:
Size- and position-controlled Ge nanocrystals separated by high-k dielectrics,
.
A. Leineweber, M. Fischer, S. Kante, S. Martin:
Effect of Cu on Nitriding of α-Fe,
.
K. Lu, A. Chauhan, D. Litvinov, A.S. Tirunilai, J. Freudenberger, A. Kauffmann, M. Heilmaier, J. Aktaa:
Micro-mechanical deformation behavior of CoCrFeMnNi high-entropy alloy,
.
S. Martin, D. Sulik, X.F. Fang, H. Becker, A. Leineweber:
Steel–Aluminum Hybrid Die Casting: Microstructures related to the applied Al–Si bond coating,
.
S. Martin, A. Weidner, C. Ullrich, C. Schimpf, M. Motylenko, R. Lehnert, H. Biermann, D. Rafaja, A. Vinogradov, Y. Estrin:
Deformation behaviour of TWIP steels: Constitutive modelling informed by local and integral experimental methods used in concert,
.
S. Martin, A. Winkelmann, A. Leineweber:
Domain structure of pseudosymmetric η″-ordered Cu6Sn5 by EBSD analysis,
.
B. Paul, A. Hofmann, S. Weinert, F. Frank, U. Wolff, M. Krautz, J. Edelmann, M.W. Gee, C. Reeps, J. Hufenbach:
Effect of Blasting Treatments on the Surface Topography and Cell Adhesion on Biodegradable FeMn‐Based Stents Processed by Laser Powder Bed Fusion,
.
B. Paul, A. Lode, A.-M. Placht, A. Voß, S. Pilz, U. Wolff, S. Oswald, A. Gebert, M. Gelinsky, J. Hufenbach:
Cell-Material Interactions in Direct Contact Culture of Endothelial Cells on Biodegradable Iron-Based Stents Fabricated by Laser Powder Bed Fusion and Impact of Ion Release,
.
A. Pukenas, P. Chekhonin, J. Scharnweber, R. Chulist, C.-G. Oertel, J. Freudenberger, W. Skrotzki:
TiAl-based semi-finished material produced by reaction annealing of Ti/Al layered composite sheets,
.
A. Salomon, M. Motylenko, D. Rafaja:
Formation of Interface Layers between Corundum‐Based Refractory Ceramics with Carbon Additions and Molten 42CrMo4 Steel,
.
R. Schaarschuch, C.-G. Oertel, A. Pukenas, S. Zhou, G. Cao, J. Freudenberger, W. Gan, E. Maawad, R. Chulist, W. Skrotzki:
Low temperature deformation mechanisms of polycrystalline CoZr and Co39Ni11Zr50 B2-type intermetallic compounds,
.
D. Schliephake, C. Lopes, Y.M. Eggeler, H. Chen, J. Freudenberger, D. Bayoumy, A.J. Huang, A. Kauffmann:
Improved work hardening capability and ductility of an additively manufactured and deformed Al-Mn-Mg-Sc-Zr alloy,
.
J.P. Schoß, H. Becker, A. Keßler, A. Leineweber, G. Wolf:
Removal of Iron from a Secondary Al–Si Die‐Casting Alloy by Metal Melt Filtration in a Laboratory Filtration Apparatus,
.
A. Schramm, R. Nowak, G. Bruzda, W. Polkowski, O. Fabrichnaya, C.G. Aneziris:
High temperature wettability and corrosion of ZrO2, Al2O3, Al2O3-C, MgO and MgAlON ceramic substrates by an AZ91 magnesium alloy melt,
.
A. Schramm, M. Thümmler, O. Fabrichnaya, S. Brehm, J. Kraus, J. Kortus, D. Rafaja, C. Scharf, C.G. Aneziris:
Reaction Sintering of MgAlON at 1500 °C from Al2O3, MgO and AlN and Its Wettability by AlSi7Mg,
.
M. Seleznev, T. Gustmann, J.M. Friebel, U.A. Peuker, U. Kühn, J.K. Hufenbach, H. Biermann, A. Weidner:
In situ detection of cracks during laser powder bed fusion using acoustic emission monitoring,
.
A.S. Tirunilai, K.-P. Weiss, J. Freudenberger, M. Heilmaier, A. Kauffmann:
Revealing the Role of Cross Slip for Serrated Plastic Deformation in Concentrated Solid Solutions at Cryogenic Temperatures,
.
A. Walnsch, T. Kaaden, P.D.B. Fischer, M. Motylenko, M. Seyring, A. Leineweber, S. Lippmann:
Formation of a nanoscale two-phase microstructure in Cu–Zn(Al) samples with macroscopic concentration gradient,
.
Z. Wang, X. Lin, L. Wang, H. Yang, Y. Zhou, J.K. Hufenbach, K. Kosiba, T. Zhang, W. Huang:
Novel high-strength Al-Cu-Cd alloy fabricated by arc-directed energy deposition: Precipitation behavior of the Cd phase and grain evolution,
.
X. Wei, S. Dudczig, E. Storti, M. Ilatovskaia, R. Endo, C.G. Aneziris, O. Volkova:
Interaction of molten Armco iron with various ceramic substrates at 1600 °C,
.
X. Wei, E. Storti, S. Dudczig, A. Yehorov, O. Fabrichnaya, C.G. Aneziris, O. Volkova:
The interaction of carbon-bonded ceramics with Armco iron,
.
X. Wei, A. Yehorov, E. Storti, S. Dudczig, O. Fabrichnaya, C.G. Aneziris, O. Volkova:
Phenomenon of Whiskers Formation in Al2O3 −C Refractories,
.
J. Zeisig, L. Giebeler, A. Gebert, S. Oswald, U. Kühn, J. Hufenbach:
Novel Corrosion‐Resistant Tool Steels with Superior Wear Properties,
.
C. Hempel, M. Mandel, C. Schimpf, L. Krüger:
Long‐term low‐temperature hot corrosion of PTA welded René 41 superalloy under marine‐like conditions,
.
A. Jaafar, C. Schimpf, M. Mandel, C. Hecker, D. Rafaja, L. Krüger, P. Arki, Y. Joseph:
Sol–gel derived hydroxyapatite coating on titanium implants: Optimization of sol–gel process and engineering the interface,
.
A. Schramm, S.M. Jafarpour, C. Schimpf, H. Biermann, A. Dalke:
Effect of bias plasma on active screen nitrocarburising response of AISI 420 martensitic stainless steel,
.
M. Valášková, P. Leštinský, L. Matějová, K. Klemencová, M. Ritz, C. Schimpf, M. Motylenko, D. Rafaja, J. Bělík:
Hematites Precipitated in Alkaline Precursors: Comparison of Structural and Textural Properties for Methane Oxidation,
.
M.H. Wetzel, M.J. Kriegel, C. Schimpf, A. Leineweber:
Thermodynamic description of high-pressure phase equilibria in the Fe–N system,
.