Abouridouane, M.; Laschet, G.; Kripak, V.; Texeira, A.; Dierdorf, J.; Prahl, U.; Klocke, F. (2017): Cutting Simulations of Two Gear Steels with Microstructure Dependent Material Laws. In: Procedia CIRP 58. DOI: 10.1016/j.procir.2017.03.332.
Aryshensky, E. V. (2017): Study of texture evolution in aluminum low alloyed sheets during its hot rolling in industrial continuous mills. Dissertation. Technische ±«²Ô¾±±¹±ð°ù²õ¾±³Ùä³Ù Bergakademie Freiberg, Freiberg. Institut für Metallformung.
Bleck, W.; Brecher, C.; Herty, M.; Hirt, G.; Hopmann, C.; Klocke, F. et al. (2017): Integrated computational materials and production engineering (ICMPE). In: Integrative Production Technology: Theory and Applications. DOI: 10.1007/978-3-319-47452-6.
Brecher, C.; Bleck, W.; Feldhusen, J.; Hirt, G.; Klocke, F.; Reisgen, U. et al. (2017): Multi-technology platforms (MTPs). In: Integrative Production Technology: Theory and Applications. DOI: 10.1007/978-3-319-47452-6.
Deepu, M. J.; Farivar, H.; Prahl, U.; Phanikumar, G. (2017): Microstructure based simulations for prediction of flow curves and selection of process parameters for inter-critical annealing in DP steel. In: IOP Conference Series: Materials Science and Engineering 192 (1). DOI: 10.1088/1757-899X/192/1/012010.
Farivar, H.; Rothenbucher, G.; Prahl, U.; Bernhardt, R. (2017): ICME-Based Process and Alloy Design for Vacuum Carburized Steel Components with High Potential of Reduced Distortion. In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017): Springer, S. 133–144.
Haase, C.; Bültmann, J.; Hof, J.; Ziegler, S.; Bremen, S.; Hinke, C. et al. (2017): Exploiting process-related advantages of selective laser melting for the production of high-manganese steel. In: Materials 10 (1). DOI: 10.3390/ma10010056.
Henseler, Thorsten; Ullmann, Madlen; Kawalla, R.; Berge, Franz (2017): Influence of the Sheet Manufacturing Process on the Forming Limit Behaviour of Twin-Roll Cast, Rolled and Heat-Treated AZ31. In: KEM 746, S. 154–160. DOI: 10.4028 www.scientific.net/KEM.746.154.
Henseler, Thorsten; Ullmann, Madlen; Korpała, G.; Klimaszewska, K.; Kawalla, R.; Berge, Franz (2017): Influence of deformation controlled strain rate on tensile and compression behaviour of magnesium and steel wire. In: Materials Science Forum 892 MSF, S. 89–96. DOI: 10.4028 .
Hüter, C.; Neugebauer, J.; Boussinot, G.; Svendsen, B.; Prahl, U.; Spatschek, R. (2017): Modelling of grain boundary dynamics using amplitude equations. In: Continuum Mechanics and Thermodynamics 29 (4), S. 895–911. DOI: 10.1007/s00161-015-0424-7.
Jain, Praveen Kumar; Lamirel, Jean-Charles; Babbar, Parveen (Hg.) (2017): Trends in bibliometrics and scientometrics studies. COLLNET Meeting. London, London: Athena Academic.
Jeschke, S.; Bleck, W.; Richert, A.; Schuh, G.; Schulz, W.; Ziefle, M. et al. (2017): Scientific cooperation engineering. In: Integrative Production Technology: Theory and Applications. DOI: 10.1007/978-3-319-47452-6.
John, D. M.; Farivar, H.; Rothenbucher, G.; Kumar, R.; Zagade, P.; Khan, D. et al. (2017): An Attempt to integrate Software Tools at Microscale and above towards an ICME Approach for Heat Treatment of a DP Steel Gear with Reduced Distortion. In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017): Springer, S. 3–13.
Komerla, K.; Naumov, A.; Mertin, C.; Prahl, U.; Bleck, W. (2017): Investigation of microstructure and mechanical properties of friction stir welded AA6016-T4 and DC04 alloy joints. In: International Journal of Advanced Manufacturing Technology, S. 1–11. DOI: 10.1007/s00170-017-1022-6.
Korpała, G.; Hoffmann, Frank; Kawalla, R. (2017): Development of a procedure for low-temperature testing of wire materials and basic research into the behaviour of materials in the temperature range of -50 to -80 °C. In: Materials Science Forum 892 MSF, S. 82–88. DOI: 10.4028 .
Korpała, G.; Ullmann, M.; Graf, M.; Wester, H.; Bouguecha, A.; Awiszus, B. et al. (2017): Modelling the influence of carbon content on material behavior during forging. In:. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF GLOBAL NETWORK FOR INNOVATIVE TECHNOLOGY AND AWAM INTERNATIONAL CONFERENCE IN CIVIL ENGINEERING (IGNITE-AICCE’17): Sustainable Technology And Practice For Infrastructure and Community Resilience. Penang, Malaysia, 8–9 August 2017: Author(s) (AIP Conference Proceedings), S. 190013.
Nam, Alexander; Kawalla, Rudolf; Zinoviev, Aleksandr; Erisov, Yaroslav A.; Prüfert, Uwe; Eiermann, Michael (2017): Temperature Validation of 3D Model for the Reversing Hot Rolling in Connection with a Coil Model. In: KEM 746, S. 132–137. DOI: 10.4028 .
Oswald, Anja; Schmidtchen, Rosita; Šimek, D.; Rafaja, D.; Kawalla, R.; Lehmann, Gunter (2017): Advanced possibilities of fast quality check in wire production processes by means of fast microstructure analysis. In: Materials Science Forum 892 MSF, S. 73–81. DOI: 10.4028 .
Poprawe, R.; Bleck, W.; Piller, F. T.; Schuh, G.; Barg, S.; Bohl, A. et al. (2017): Direct, mold-less production systems. In: Integrative Production Technology: Theory and Applications. DOI: 10.1007/978-3-319-47452-6\textunderscore.
Prahl, U.; Lin, M.; Weikamp, M.; Hueter, C.; Schicchi, D.; Hunkel, M.; Spatschek, R. (2017): Multiscale, Coupled Chemo-mechanical Modeling of Bainitic Transformation during Press Hardening. In: Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017): Springer, S. 335–343.
Ramazani, A.; Serafeim, A.; Prahl, U. (2017): Towards a micromechanical based description for strength increase in dual phase steels during bake-hardening process. In: Materials Science and Engineering A 702, S. 386–397. DOI: 10.1016/j.msea.2017.07.017.
Schacht, K.; Motaman, A. H.; Prahl, U.; Bleck, W. (2017): A unified dislocation density-dependent physical-based constitutive model for cold metal forming. In: AIP Conference Proceedings 1896. DOI: 10.1063/1.5008195.
Schmidtchen, Matthias; Adamyanets, Pavel; Kawalla, R. (2017): Model approaches for simulation of processes in rod and wire production. In: Materials Science Forum 892 MSF, S. 34–43. DOI: 10.4028/www.scientific.net/MSF.892.34.
Schmitz, G. J.; Farivar, H.; Prahl, U. (2017): Scenario for Data Exchange at the Microstructure Scale. In: Integrating Materials and Manufacturing Innovation 6 (1), S. 127–133.
Schneider, J.; Stöcker, A.; Kawalla, R.; Franke, Armin (2017): Evolution of Optimum Grain Size for Low Loss Ferritic FeSi Steels. In: Steel Research International, S. 1700201. DOI: 10.1002/srin.201700201.
Sharma, M.; Dahmen, K.; Prahl, U.; Bleck, W. (2017): Productivity in Science, and Team Diversity: An exploratory study. In: Praveen Kumar Jain, Jean-Charles Lamirel und Parveen Babbar (Hg.): Trends in bibliometrics and scientometrics studies. London, London: Athena Academic, S. 27–41.
Sharma, M.; Richter, S.; Prahl, U.; Bleck, W. (2017): Characterization of Nb-Microsegregation and Eutectic Carbide in As-Cast Nb-Microalloyed Al-Free Case Hardening Steel. In: Steel Research International 88 (10). DOI: 10.1002/srin.201700092.
Stöcker, A.; Schmidtchen, Matthias; Kawalla, R. (2017): Hot rolling simulation for non-oriented electrical steel. In: AIP Conference Proceedings, 190021-1 bis 190021-6. DOI: 10.1063/1.5008234.
Suwanpinij, P.; Li, X.; Prahl, U.; Bleck, W. (2017): Modeling Bainite Transformation and Retained Austenite in Hot Rolled TRIP Steel by Instantaneous Carbon Enrichment. In: Steel Research International 88 (12). DOI: 10.1002/srin.201700122.
Weikamp, M.; Hüter, C.; Lin, M.; Prahl, U.; Schicchi, D.; Hunkel, M.; Spatschek, R. (2017): Scale bridging simulations of large elastic deformations and bainitic transformations. In: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) 10164 LNCS, S. 125–138. DOI: 10.1007/978-3-319-53862-4.
Berge, F.; Teuber, M.; Kawalla, R.; Ullmann, M.: Influence of heat-treatment and rolling conditions on the mechanical warm forming properties of twin-roll cast AZ31,.
Henseler, T., Ullmann, M., Korpala, G., Klimaszewska, K., Kawalla, R. u. Berge, F.: Influence of deformation controlled strain rate on tensile and compression behaviour of magnesium and steel wire.
Korpala, G., Hoffmann, F. u. Kawalla, R.: Development of a procedure for low-temperature testing of wire materials and basic research into the behaviour of materials in the temperature range of -50 to -80 °C.
Oswald, A., Schmidtchen, R., Å imek, D., Rafaja, D., Kawalla, R. u. Lehmann, G.: Advanced possibilities of fast quality check in wire production processes by means of fast microstructure analysis.
Schmidtchen, M., Adamyanets, P. u. Kawalla, R.: Model approaches for simulation of processes in rod and wire production.